Charge 1. flows until the potential difference across the capacitor is the same as the potential difference across the battery. The charge on the capacitor is then q = CV, and this is the same as the total charge that has passed through the battery. Thus, q = (25 106 F)(120 V) = 3.0 103 C.
2. (a) The capacitance of the system is
C= q 70 pC = = 35 pF. . V 20 V
(b) The capacitance is independent of q; it is still 3.5 pF. (c) The potential difference becomes
V = q 200 pC = = 57 V. C 35 pF .
3. (a) The capacitance of a parallel-plate capacitor is given by C = 0A/d, where A is the area of each plate and d is the plate separation. Since the plates are circular, the plate area is A = R2, where R is the radius of a plate. Thus, C=
0 R 2
d
(8.85 10 =
-12
1.310 m
F m ) ( 8.2 10-2 m )
-3
2
= 1.44 10-10 F = 144pF.
(b) The charge on the positive plate is given by q = CV, where V is the potential difference across the plates. Thus, q = (1.44 1010 F)(120 V) = 1.73 108 C = 17.3 nC.
4. We use C = A0/d. (a) Thus,
100 m2 8.85 10-12 . A 0 d= = 100 F . C
c
hd
C2 N m2
i = 8.85 10
-12
m.
(b) Since d is much less than the size of an atom ( 1010 m), this capacitor cannot be constructed.
5. Assuming conservation of volume, we find the radius of the combined spheres, then use C = 40R to find the capacitance. When the drops combine, the volume is doubled. It is then V = 2(4/3)R3. The new radius R' is given by
4 4 3 ( R ) = 2 R 3 3 3
R = 21 3 R .
The new capacitance is
C = 4 0 R = 4 0 21 3 R = 5.04 0 R.
With R = 2.00 mm, we obtain C = 5.04 ( 8.85 10-12 F m )( 2.00 10-3 m ) = 2.80 10-13 F .
6. (a) We use Eq. 25-17:
C = 4 0 40.0 mm 38.0 mm ab = = 84.5 pF. 2 b-a 8.99 109 NCm 40.0 mm - 38.0 mm 2
b
gb
g
d
ib
g
(b) Let the area required be A. Then C = 0A/(b a), or
A= C (b - a ) =
0
( 84.5 pF )( 40.0 mm - 38.0 mm ) = 191cm 2 .
(8.85 10
-12
C2 N m 2
)
7. The equivalent capacitance is given by Ceq = q/V, where q is the total charge on all the capacitors and V is the potential difference across any one of them. For N identical capacitors in parallel, Ceq = NC, where C is the capacitance of one of them. Thus, NC = q / V and
N= q 1.00C = = 9.09 103 . VC (110V ) (1.00 10-6 F )
8. The equivalent capacitance is Ceq = C3 + 10.0 F 5.00 F C1C2 = 4.00F + = 7.33 F. C1 + C2 10.0 F + 5.00 F
b
gb
g
9. The equivalent capacitance is Ceq =
C1 + C2 + C3
( C1 + C2 ) C3 = (10.0 F + 5.00 F )( 4.00 F ) = 3.16 F.
10.0 F + 5.00 F + 4.00 F
10. The charge that passes through meter A is
q = CeqV = 3CV = 3 25.0 F 4200 V = 0.315 C.
b
gb
g
11. (a) and (b) The original potential difference V1 across C1 is V1 = CeqV C1 + C2 =
( 3.16 F )(100.0 V ) = 21.1V.
10.0 F + 5.00 F
Thus V1 = 100.0 V 21.1 V = 78.9 V and q1 = C1V1 = (10.0 F)(78.9 V) = 7.89 104 C.
12. (a) The potential difference across C1 is V1 = 10.0 V. Thus, q1 = C1V1 = (10.0 F)(10.0 V) = 1.00 104 C. (b) Let C = 10.0 F. We first consider the three-capacitor combination consisting of C2 and its two closest neighbors, each of capacitance C. The equivalent capacitance of this combination is
Ceq = C + C2 C = 1.50 C. C + C2
Also, the voltage drop across this combination is
V= CV1 CV1 = = 0.40V1 . C + Ceq C + 1.50 C
Since this voltage difference is divided equally between C2 and the one connected in series with it, the voltage difference across C2 satisfies V2 = V/2 = V1/5. Thus
q2 = C2V2 = (10.0 F ) 10.0V = 2.00 10-5 C. 5
13. The charge initially on the charged capacitor is given by q = C1V0, where C1 = 100 pF is the capacitance and V0 = 50 V is the initial potential difference. After the battery is disconnected and the second capacitor wired in parallel to the first, the charge on the first capacitor is q1 = C1V, where V = 35 V is the new potential difference. Since charge is conserved in the process, the charge on the second capacitor is q2 = q q1, where C2 is the capacitance of the second capacitor. Substituting C1V0 for q and C1V for q1, we obtain q2 = C1 (V0 V). The potential difference across the second capacitor is also V, so the capacitance is
C2 = q2 V0 - V 50 V - 35 V = C1 = (100 pF ) = 43pF. V V 35 V
14. The two 6.0 F capacitors are in parallel and are consequently equivalent to Ceq = 12 F . Thus, the total charge stored (before the squeezing) is qtotal = CeqVbattery =120 C . (a) and (b) As a result of the squeezing, one of the capacitors is now 12 F (due to the inverse proportionality between C and d in Eq. 25-9) which represents an increase of 6.0 F and thus a charge increase of qtotal = CeqVbattery = (6.0 F)(10 V) = 60 C .
15. (a) First, the equivalent capacitance of the two 4.00 F capacitors connected in series is given by 4.00 F/2 = 2.00 F. This combination is then connected in parallel with two other 2.00-F capacitors (one on each side), resulting in an equivalent capacitance C = 3(2.00 F) = 6.00 F. This is now seen to be in series with another combination, which consists of the two 3.0-F capacitors connected in parallel (which are themselves equivalent to C' = 2(3.00 F) = 6.00 F). Thus, the equivalent capacitance of the circuit is Ceq = CC ( 6.00 F ) ( 6.00 F ) = = 3.00 F. C + C 6.00 F + 6.00 F
(b) Let V = 20.0 V be the potential difference supplied by the battery. Then q = CeqV = (3.00 F)(20.0 V) = 6.00 105 C. (c) The potential difference across C1 is given by V1 =
( 6.00 F ) ( 20.0V ) = 10.0V . CV = C + C 6.00 F + 6.00 F
(d) The charge carried by C1 is q1 = C1V1= (3.00 F)(10.0 V) = 3.00 105 C. (e) The potential difference across C2 is given by V2 = V V1 = 20.0 V 10.0 V = 10.0 V. (f) The charge carried by C2 is q2 = C2V2 = (2.00 F)(10.0 V) = 2.00 105 C. (g) Since this voltage difference V2 is divided equally between C3 and the other 4.00-F capacitors connected in series with it, the voltage difference across C3 is given by V3 = V2/2 = 10.0 V/2 = 5.00 V. (h) Thus, q3 = C3V3 = (4.00 F)(5.00 V) = 2.00 105 C.
16. We determine each capacitance from the slope of the appropriate line in the graph. Thus, C1 = (12 C)/(2.0 V) = 6.0 F. Similarly, C2 = 4.0 F and C3 = 2.0 F. The total equivalent capacitance is C123 = ((C1)-1 + (C3 + C2)-1)-1 = 3.0 F. This implies that the charge on capacitor 1 is (3.0 F)(6.0 V) = 18 C. The voltage across capacitor 1 is therefore (18 C)/( 6.0 F) = 3.0 V. From the discussion in section 25-4, we conclude that the voltage across capacitor 2 must be 6.0 V 3.0 V = 3.0 V. Consequently, the charge on capacitor 2 is (4.0 F)( 3.0 V) = 12 C.
17. (a) After the switches are closed, the potential differences across the capacitors are the same and the two capacitors are in parallel. The potential difference from a to b is given by Vab = Q/Ceq, where Q is the net charge on the combination and Ceq is the equivalent capacitance. The equivalent capacitance is Ceq = C1 + C2 = 4.0 106 F. The total charge on the combination is the net charge on either pair of connected plates. The charge on capacitor 1 is
q1 = C1V = (1.0 10-6 F ) (100 V ) = 1.0 10-4 C
and the charge on capacitor 2 is
q2 = C2V = 3.0 10-6 F 100 V = 3.0 10-4 C ,
c
hb
g
so the net charge on the combination is 3.0 104 C 1.0 104 C = 2.0 104 C. The potential difference is Vab = 2.0 10-4 C = 50 V. 4.0 10-6 F
(b) The charge on capacitor 1 is now q1 = C1Vab = (1.0 106 F)(50 V) = 5.0 105 C. (c) The charge on capacitor 2 is now q2 = C2Vab = (3.0 106 F)(50 V) = 1.5 104 C.
18. Eq. 23-14 applies to each of these capacitors. Bearing in mind that = q/A, we find the total charge to be qtotal = q1 + q2 = 1 A1 + 2 A2 = o E1 A1 + o E2 A2 = 3.6 pC where we have been careful to convert cm2 to m2 by dividing by 104.
19. (a) and (b) We note that the charge on C3 is q3 = 12 C 8.0 C = 4.0 C. Since the charge on C4 is q4 = 8.0 C, then the voltage across it is q4/C4 = 2.0 V. Consequently, the voltage V3 across C3 is 2.0 V C3 = q3/V3 = 2.0 F. Now C3 and C4 are in parallel and are thus equivalent to 6 F capacitor which would then be in series with C2 ; thus, Eq 25-20 leads to an equivalence of 2.0 F which is to be thought of as being in series with the unknown C1 . We know that the total effective capacitance of the circuit (in the sense of what the battery "sees" when it is hooked up) is (12 C)/Vbattery = 4F/3. Using Eq 25-20 again, we find 1 3 1 + C = 4 F 2 F 1 C1 = 4.0 F .
20. We note that the total equivalent capacitance is C123 = [(C3)-1 + (C1 + C2)-1]-1 = 6 F. (a) Thus, the charge that passed point a is C123 Vbatt = (6 F)(12 V) = 72 C. Dividing this by the value e = 1.60 10-19 C gives the number of electrons: 4.5 1014, which travel to the left towards the positive terminal of the battery. (b) The equivalent capacitance of the parallel pair is C12 = C1 + C2 = 12 F. Thus, the voltage across the pair (which is the same as the voltage across C1 and C2 individually) is 72 C =6V. 12 F Thus, the charge on C1 is (4 F)(6 V) = 24 C, and dividing this by e gives the number of electrons (1.5 1014) which have passed (upward) though point b. (c) Similarly, the charge on C2 is (8 F)(6 V) = 48 C, and dividing this by e gives the number of electrons (3.0 1014) which have passed (upward) though point c. (d) Finally, since C3 is in series with the battery, its charge is the same that passed through the battery (the same as passed through the switch). Thus, 4.5 1014 electrons passed rightward though point d. By leaving the rightmost plate of C3, that plate is then the positive plate of the fully charged capacitor making its leftmost plate (the one closest to the negative terminal of the battery) the negative plate, as it should be. (e) As stated in (b), the electrons travel up through point b. (f) As stated in (c), the electrons travel up through point c.
21. The charges on capacitors 2 and 3 are the same, so these capacitors may be replaced by an equivalent capacitance determined from 1 1 1 C2 + C3 = + = . Ceq C2 C3 C2 C3 Thus, Ceq = C2C3/(C2 + C3). The charge on the equivalent capacitor is the same as the charge on either of the two capacitors in the combination and the potential difference across the equivalent capacitor is given by q2/Ceq. The potential difference across capacitor 1 is q1/C1, where q1 is the charge on this capacitor. The potential difference across the combination of capacitors 2 and 3 must be the same as the potential difference across capacitor 1, so q1/C1 = q2/Ceq. Now some of the charge originally on capacitor 1 flows to the combination of 2 and 3. If q0 is the original charge, conservation of charge yields q1 + q2 = q0 = C1 V0, where V0 is the original potential difference across capacitor 1. (a) Solving the two equations q1 q = 2 C1 Ceq for q1 and q2, we obtain
q1 = C12 ( C2 + C3 ) V0 C12V0 C12V0 = = . C2C3 Ceq + C1 C1C2 + C1C3 + C2C3 + C1 C2 + C3
and
q1 + q2 = C1V0
With V0 = 12.0 V, C1= 4.00 F, C2= 6.00 F and C3 =3.00 F, we find Ceq = 2.00 F and q1 = 32.0 C. (b) The charge on capacitors 2 is q2 = C1V0 - q1 = (4.00 F)(12.0V) - 32.0 F = 16.0 F (c) The charge on capacitor 3 is the same as that on capacitor 2: q3 = C1V0 - q1 = (4.00 F)(12.0V) - 32.0 F = 16.0 F
22. Initially the capacitors C1, C2, and C3 form a combination equivalent to a single capacitor which we denote C123. This obeys the equation 1 1 1 C1 + C2 + C3 = C123 . Hence, using q = C123V and the fact that q = q1 = C1 V1 , we arrive at C2 + C3 V1 = C + C + C V . 1 2 3 (a) As C3 this expression becomes V1 = V. Since the problem states that V1 approaches 10 volts in this limit, so we conclude V = 10 V. (b) and (c) At C3 = 0, the graph indicates V1 = 2.0 V. The above expression consequently implies C1 = 4C2 . Next we note that the graph shows that, at C3 = 6.0 F, the voltage across C1 is exactly half of the battery voltage. Thus, C2 + 6.0 F 1 = 2 C1 + C2 + 6.0 F = C2 + 6.0 F 4C2 + C2 + 6.0 F
which leads to C2 = 2.0 F. We conclude, too, that C1 = 8.0 F.
23. (a) In this situation, capacitors 1 and 3 are in series, which means their charges are necessarily the same: q1 = q3 = C1C3V (1.00 F ) ( 3.00 F ) (12.0V ) = = 9.00 C. C1 + C3 1.00 F+3.00 F
(b) Capacitors 2 and 4 are also in series: q2 = q4 = (c) q3 = q1 = 9.00 C. (d) q4 = q2 = 16.0 C. (e) With switch 2 also closed, the potential difference V1 across C1 must equal the potential difference across C2 and is V1 = C2C4V ( 2.00 F ) ( 4.00 F ) (12.0V ) = = 16.0 C. C2 + C4 2.00 F + 4.00 F
( 3.00 F + 4.00 F )(12.0V ) C3 + C4 V= = 8.40V. C1 + C2 + C3 + C4 1.00 F + 2.00 F + 3.00 F + 4.00 F
Thus, q1 = C1V1 = (1.00 F)(8.40 V) = 8.40 C. (f) Similarly, q2 = C2V1 = (2.00 F)(8.40 V) = 16.8 C. (g) q3 = C3(V V1) = (3.00 F)(12.0 V 8.40 V) = 10.8 C. (h) q4 = C4(V V1) = (4.00 F)(12.0 V 8.40 V) = 14.4 C.
24. Let = 1.00 m3. Using Eq. 25-25, the energy stored is
1 1 C2 2 -12 2 U = uv = 0 E v = 8.85 10 150 V m ) (1.00 m3 ) = 9.96 10-8 J. 2 ( 2 2 Nm
1 25. The energy stored by a capacitor is given by U = 2 CV 2 , where V is the potential difference across its plates. We convert the given value of the energy to Joules. Since a Joule is a wattsecond, we multiply by (103 W/kW) (3600 s/h) to obtain 10 kW h = 3.6 107 J . Thus,
C=
7 2U 2 3.6 10 J = = 72 F. 2 V2 1000 V
c b
h
g
26. (a) The capacitance is
C=
0A
d
d8.85 10 =
-12
C2 N m 2
ic40 10
-3
-4
m2
. 10 10 m
h = 35 10 .
-11
F = 35pF .
(b) q = CV = (35 pF)(600 V) = 2.1 108 C = 21 nC.
1 (c) U = 2 CV 2 = 1 2
b35 pFgb21 nCg
2
= 6.3 10-6 J = 6.3 J.
(d) E = V/d = 600 V/1.0 103 m = 6.0 105 V/m. (e) The energy density (energy per unit volume) is u= U 6.3 10-6 J = = 1.6 J m3 . Ad ( 40 10-4 m 2 )(1.0 10-3 m )
27. The total energy is the sum of the energies stored in the individual capacitors. Since they are connected in parallel, the potential difference V across the capacitors is the same and the total energy is
U= 1 1 2 ( C1 + C2 )V 2 = ( 2.0 10-6 F + 4.0 10-6 F ) ( 300 V ) = 0.27 J. 2 2
28. (a) The potential difference across C1 (the same as across C2) is given by V1 = V2 =
(15.0 F )(100V ) = 50.0V. C3V = C1 + C2 + C3 10.0 F+5.00 F+15.0 F
Also, V3 = V V1 = V V2 = 100 V 50.0 V = 50.0 V. Thus, q1 = C1V1 = (10.0 F )( 50.0V ) = 5.00 10-4 C q2 = C2V2 = ( 5.00 F )( 50.0V ) = 2.50 10-4 C q3 = q1 + q2 = 5.00 10-4 C + 2.50 10-4 C=7.50 10-4 C. (b) The potential difference V3 was found in the course of solving for the charges in part (a). Its value is V3 = 50.0 V. (c) The energy stored in C3 is
1 1 2 U 3 = C3V32 = (15.0 F )( 50.0V ) = 1.88 10-2 J. 2 2
(d) From part (a), we have q1 = 5.00 10-4 C , and (e) V1 = 50.0 V. (f) The energy stored in C1 is
1 1 2 U1 = C1V12 = (10.0 F )( 50.0V ) = 1.25 10-2 J. 2 2
(g) Again, from part (a), q2 = 2.50 10-4 C , and (h) V2 = 50.0 V. (i) The energy stored in C2 is
1 1 2 U 2 = C2V22 = ( 5.00 F )( 50.0V ) = 6.25 10-3 J. 2 2
29. The energy per unit volume is
1 1 e u = 0E 2 = 0 2 2 4 0 r 2
FG H
IJ K
2
=
e2 . 32 2 0r 4
(a) At r = 1.00 10-3 m , with e = 1.60 10-19 C and 0 = 8.85 10-12 C2 /N m 2 , we have
u = 9.16 10-18 J/m3 .
(b) Similarly, at r = 1.00 10-6 m , u = 9.16 10-6 J/m3 , (c) at r = 1.00 10-9 m , u = 9.16 106 J/m3 , and (d) at r = 1.00 10-12 m , u = 9.16 1018 J/m3 . (e) From the expression above u r4. Thus, for r 0, the energy density u .
30. (a) The charge q3 in the Figure is q3 = C3V = (4.00 F)(100 V) = 4.00 10-4 C . (b) V3 = V = 100 V.
1 (c) Using U i = 2 CVi 2 , we have U 3 = 1 C3V32 = 2.00 10-2 J . i 2
(d) From the Figure,
q1 = q2 = C1C2V (10.0 F)(5.00 F)(100 V) = = 3.33 10-4 C. C1 + C2 10.0 F + 5.00 F
(e) V1 = q1/C1 = 3.33 104 C/10.0 F = 33.3 V. (f) U1 = 1 C1V12 = 5.55 10-3 J . 2 (g) From part (d), we have q2 = q1 = 3.33 10-4 C. (h) V2 = V V1 = 100 V 33.3 V = 66.7 V. (i) U 2 = 1 C2V22 = 1.1110-2 J . 2
31. (a) Let q be the charge on the positive plate. Since the capacitance of a parallel-plate capacitor is given by 0 A d i , the charge is q = CV = 0 AVi d i . After the plates are pulled apart, their separation is d f and the potential difference is Vf. Then q = 0 AV f 2d f and Vf = df q= d f 0 A d Vi = f Vi . 0 A di di
0 A
With di = 3.00 10-3 m , Vi = 6.00 V and d f = 8.00 10-3 m , we have V f = 16.0 V . (b) The initial energy stored in the capacitor is (in SI units)
AV 2 (8.85 10-12 )(8.50 10-4 )(6.00) 2 1 = 4.5110-11 J. U i = CVi 2 = 0 i = -3 2 2d i 2(3.00 10 )
(c) The final energy stored is
1 A 1 A df U f = 0 V f2 = 0 Vi 2 df 2 d f di
2
=
d f 0 AVi 2 df = Ui . di di di
With d f / di = 8.00 / 3.00 , we have U f = 1.20 10-10 J. (d) The work done to pull the plates apart is the difference in the energy: W = Uf Ui = 7.52 10-11 J.
32. We use E = q / 4 0 R 2 = V / R . Thus 1 1 V u = 0E2 = 0 2 2 R
2
1 C2 = 8.85 10-12 2 N m2
8000 V 0.050 m
2
= 0.11 J/m3 .
33. (a) They each store the same charge, so the maximum voltage is across the smallest capacitor. With 100 V across 10 F, then the voltage across the 20 F capacitor is 50 V and the voltage across the 25 F capacitor is 40 V. Therefore, the voltage across the arrangement is 190 V. (b) Using Eq. 25-21 or Eq. 25-22, we sum the energies on the capacitors and obtain Utotal = 0.095 J.
34. If the original capacitance is given by C = 0A/d, then the new capacitance is C ' = 0 A / 2d . Thus C'/C = /2 or
= 2C'/C = 2(2.6 pF/1.3 pF) = 4.0.
35. The capacitance with the dielectric in place is given by C = C0, where C0 is the capacitance before the dielectric is inserted. The energy stored is given by 1 1 U = 2 CV 2 = 2 C0V 2 , so
=
2U 2(7.4 10-6 J) = = 4.7. C0V 2 (7.4 10-12 F)(652V) 2
According to Table 25-1, you should use Pyrex.
36. (a) We use C = 0A/d to solve for d:
d=
0 A
C
(8.85 10 =
-12
50 10
C2 N m 2 -12
) (0.35 m ) = 6.2 10
2
-2
F
m.
(b) We use C . The new capacitance is C' = C(/air) = (50 pf)(5.6/1.0) = 2.8102 pF.
37. The capacitance of a cylindrical capacitor is given by C = C0 = 2 0 L , ln(b / a )
where C0 is the capacitance without the dielectric, is the dielectric constant, L is the length, a is the inner radius, and b is the outer radius. The capacitance per unit length of the cable is 2 0 C 2(2.6)(8.8510-12 F/m) = = = 8.110-11 F/m = 81 pF/m. L ln(b / a ) ln[(0.60 mm)/(0.10 mm)]
38. Each capacitor has 12.0 V across it, so Eq. 25-1 yields the charge values once we know C1 and C2. From Eq. 25-9, C2 = and from Eq. 25-27, C1 = 0 A -11 d = 6.64 10 F . 0 A -11 d = 2.21 10 F ,
This leads to q1 = C1V1 = 8.00 10-10 C and q2 = C2V2 = 2.66 10-10 C. The addition of these gives the desired result: qtot = 1.06 10-9 C. Alternatively, the circuit could be reduced to find the qtot.
39. The capacitance is given by C = C0 = 0A/d, where C0 is the capacitance without the dielectric, is the dielectric constant, A is the plate area, and d is the plate separation. The electric field between the plates is given by E = V/d, where V is the potential difference between the plates. Thus, d = V/E and C = 0AE/V. Thus,
A= CV . 0 E
For the area to be a minimum, the electric field must be the greatest it can be without breakdown occurring. That is, A= (7.0 10-8 F)(4.0 103 V) = 0.63 m2 . 2.8(8.85 10-12 F / m)(18 106 V / m)
40. (a) We use Eq. 25-14: C = 2 0 L (4.7)(0.15 m) = = 0.73 nF. ln(b / a ) 2 8.99 109 Nm2 ln(3.8 cm/3.6 cm) 2 C
(
)
(b) The breakdown potential is (14 kV/mm) (3.8 cm 3.6 cm) = 28 kV.
41. Using Eq. 25-29, with = q/A, we have
E = q
0 A
= 200 103 N C
which yields q = 3.3 107 C. Eq. 25-21 and Eq. 25-27 therefore lead to U= q2 q 2d = = 6.6 10-5 J . 2C 2 0 A
42. The capacitor can be viewed as two capacitors C1 and C2 in parallel, each with surface area A/2 and plate separation d, filled with dielectric materials with dielectric constants 1 and 2, respectively. Thus, (in SI units),
C = C1 + C2 = =
0 ( A / 2) 1
d
-12
+
0 ( A / 2) 2
d
=
0 A 1 + 2
d 2
(8.85 10 )(5.56 10 ) 7.00 + 12.00 = 8.4110-12 F. -3 5.56 10 2
-4
43. We assume there is charge q on one plate and charge q on the other. The electric field in the lower half of the region between the plates is
E1 = q ,
1 0 A
where A is the plate area. The electric field in the upper half is
E2 = q .
2 0 A
Let d/2 be the thickness of each dielectric. Since the field is uniform in each region, the potential difference between the plates is V= so
C= q 2 0 A 1 2 = . V d 1 + 2
1 1 E1d E2 d qd qd 1 + 2 = , + = + 2 2 2 0 A 1 2 2 0 A 1 2
LM N
OP Q
This expression is exactly the same as that for Ceq of two capacitors in series, one with dielectric constant 1 and the other with dielectric constant 2. Each has plate area A and plate separation d/2. Also we note that if 1 = 2, the expression reduces to C = 10A/d, the correct result for a parallel-plate capacitor with plate area A, plate separation d, and dielectric constant 1. With A = 7.89 10-4 m 2 , d = 4.62 10-3 m , 1 = 11.0 and 2 = 12.0 , the capacitance is, (in SI units) C= 2(8.85 10-12 )(7.89 10-4 ) (11.0)(12.0) = 1.73 10-11 F. 4.62 10-3 11.0 + 12.0
44. Let C1 = 0(A/2)1/2d = 0A1/4d, C2 = 0(A/2)2/d = 0A2/2d, and C3 = 0A3/2d. Note that C2 and C3 are effectively connected in series, while C1 is effectively connected in parallel with the C2-C3 combination. Thus, C = C1 + C2C3 2 A ( A d ) ( 2 2 ) ( 3 2 ) 0 A 1 + 2 3 . = 0 1+ 0 = C2 + C3 4d 4d 2 2 +3 2 2 +3
With A = 1.05 10-3 m 2 , d = 3.56 10-3 m , 1 = 21.0 , 2 = 42.0 and 3 = 58.0 , the capacitance is, (in SI units) C= (8.85 10-12 )(1.05 10-3 ) 2(42.0)(58.0) = 4.55 10-11 F. 21.0 + -3 4(3.56) 10 42.0 + 58.0
45. (a) The electric field in the region between the plates is given by E = V/d, where V is the potential difference between the plates and d is the plate separation. The capacitance is given by C = 0A/d, where A is the plate area and is the dielectric constant, so d = 0 A / C and 50 V 100 10-12 F VC E= = = 10 104 V m . . 0 A 5.4 8.85 10-12 F m 100 10-4 m2
b
gc
h
c
hc
h
(b) The free charge on the plates is qf = CV = (100 1012 F)(50 V) = 5.0 109 C. (c) The electric field is produced by both the free and induced charge. Since the field of a large uniform layer of charge is q/20A, the field between the plates is E= qf 2 0 A + qf 2 0 A - qi 2 0 A - qi 2 0 A ,
where the first term is due to the positive free charge on one plate, the second is due to the negative free charge on the other plate, the third is due to the positive induced charge on one dielectric surface, and the fourth is due to the negative induced charge on the other dielectric surface. Note that the field due to the induced charge is opposite the field due to the free charge, they so tend to cancel. The induced charge is therefore qi = q f - 0 AE = 5.0 10-9 C - ( 8.85 10-12 F m )(100 10-4 m 2 )(1.0 104 V m ) = 4.110-9 C = 4.1nC.
46. (a) The electric field E1 in the free space between the two plates is E1 = q/0A while that inside the slab is E2 = E1/ = q/0A. Thus, V0 = E1 d - b + E2b = and the capacitance is 8.85 10-12 NCm2 (115 10-4 m 2 ) ( 2.61) 0 A q C= = = = 13.4pF. V0 ( d - b ) + b ( 2.61)( 0.0124m - 0.00780m ) + ( 0.00780m )
2
b g
(
FG q IJ FG d - b + b IJ , H AK H K
0
)
(b) q = CV = (13.4 1012 F)(85.5 V) = 1.15 nC. (c) The magnitude of the electric field in the gap is
E1 = q 115 10-9 C . = = 113 104 N C . . -12 C 2 0 A 8.85 10 Nm2 115 10-4 m2
d
ic
h
(d) Using Eq. 25-34, we obtain E2 = E1 = 113 104 N C . = 4.33 103 N C . 2.61
47. (a) According to Eq. 25-17 the capacitance of an air-filled spherical capacitor is given by
C0 = 4 0 ab . b-a
When the dielectric is inserted between the plates the capacitance is greater by a factor of the dielectric constant . Consequently, the new capacitance is
C = 4 0 23.5 (0.0120)(0.0170) ab = = 0.107 nF. b - a 8.99 109 0.0170 - 0.0120
(b) The charge on the positive plate is
q = CV = (0.107 nF)(73.0 V) = 7.79 nC.
(c) Let the charge on the inner conductor be q. Immediately adjacent to it is the induced charge q'. Since the electric field is less by a factor 1/ than the field when no dielectric is present, then q + q' = q/. Thus, q = =
-1 ab q = 4 ( -1) 0 V b-a
23.5 - 1.00 (7.79 nC) = 7.45 nC. 23.5
48. (a) We apply Gauss's law with dielectric: q/0 = EA, and solve for :
=
q = 0 EA 8.85 10-12
d
C2 N m2
ic
8.9 10-7 C = 7.2. 14 10-6 V m 100 10-4 m2 .
hc
h
(b) The charge induced is
q = q 1-
FG H
IJ = c8.9 10 Ch FG1 - 1 IJ = 7.7 10 H 7.2 K K
1
-7
-7
C.
49. (a) Initially, the capacitance is
C0 =
0A
d
d8.85 10 =
(8.85 10
-12
12 10 .
C2 N m2 -2
. i (012 m ) = 89 pF.
2
m
(b) Working through Sample Problem 25-7 algebraically, we find:
C=
0 A ( d - b) + b
-12
=
(4.8)(1.2 - 0.40)(10 m) + (4.0 10-3 m)
C2 N m 2 -2
) (0.12m )(4.8)
2
= 1.2 102 pF.
(c) Before the insertion, q = C0V (89 pF)(120 V) = 11 nC. (d) Since the battery is disconnected, q will remain the same after the insertion of the slab, with q = 11 nC. (e) E = q / 0 A = 11 10-9 C / (8.85 10-12 (f) E' = E/ = (10 kV/m)/4.8 = 2.1 kV/m. (g) V = E(d b) + E'b = (10 kV/m)(0.012 m 0.0040 m) + (2.1 kV/m)(0.40 103 m) = 88 V. (h) The work done is Wext = U = q2 2 1 1 (1110-9 C) 2 - = C C0 2 1 1 - = -1.7 10-7 J. -12 89 10 F 120 10-12 F
C2 N m 2
) (012 m2 ) = 10 kV / m. .
50. (a) Eq. 25-22 yields
U= 1 1 CV 2 = 200 10-12 F 7.0 103 V 2 2
c
hc
h
2
= 4.9 10-3 J .
(b) Our result from part (a) is much less than the required 150 mJ, so such a spark should not have set off an explosion.
51.One way to approach this is to note that since they are identical the voltage is evenly divided between them. That is, the voltage across each capacitor is V = (10/n) volt. With C = 2.0 10-6 F, the electric energy stored by each capacitor is 1 CV2. The total 2 energy stored by the capacitors is n times that value, and the problem requires the total be equal to 25 10-6 J. Thus,
n 2 (2.0
10 10 ) n
-6
2
= 25 10-6
leads to n = 4.
52. Initially the capacitors C1, C2, and C3 form a series combination equivalent to a single capacitor which we denote C123. Solving the equation 1 1 1 C1 + C 2 + C3 = 1 C123 ,
we obtain C123 = 2.40 F. With V = 12.0 V, we then obtain q = C123V = 28.8 C. In the final situation, C2 and C4 are in parallel and are thus effectively equivalent to C24 = 12.0 F . Similar to the previous computation, we use 1 1 1 + C + C = C1 24 3 1 C1234
and find C1234 = 3.00 F. Therefore, the final charge is q = C1234V = 36.0 C. (a) This represents a change (relative to the initial charge) of q = 7.20 C. (b) The capacitor C24 which we imagined to replace the parallel pair C2 and C4 is in series with C1 and C3 and thus also has the final charge q =36.0 C found above. The voltage across C24 would be V24 = q/C24 = 36.0/12.0 = 3.00 V. This is the same voltage across each of the parallel pair. In particular, V4 = 3.00 V implies that q4 = C4 V4 = 18.0 C. (c) The battery supplies charges only to the plates where it is connected. The charges on the rest of the plates are due to electron transfers between them, in accord with the new distribution of voltages across the capacitors. So, the battery does not directly supply the charge on capacitor 4.
53. In series, their equivalent capacitance (and thus their total energy stored) is smaller than either one individually (by Eq. 25-20). In parallel, their equivalent capacitance (and thus their total energy stored) is larger than either one individually (by Eq. 25-19). Thus, the middle two values quoted in the problem must correspond to the individual capacitors. We use Eq. 25-22 and find (a) 100 J = 1 C1 (10 V)2 2 (b) 300 J = 1 C2 (10 V)2 2 C1 = 2.0 F C2 = 6.0 F .
54. We note that the voltage across C3 is V3 = (12 V 2 V 5 V ) = 5 V. Thus, its charge is q3 = C3 V3 = 4 C. (a) Therefore, since C1, C2 and C3 are in series (so they have the same charge), then 4 C C1 = 2 V = 2.0 F . (b) Similarly, C2 = 4/5 = 0.80 F.
55. (a) The number of (conduction) electrons per cubic meter is n = 8.49 1028 m3. The volume in question is the face area multiplied by the depth: Ad. The total number of electrons which have moved to the face is -3.0 x 10-6 C 1.9 1013 . -19 -1.6 x 10 C
N=
Using the relation N = nAd, we obtain d = 1.1 10-12 m, a remarkably small distance!
56. Initially, the total equivalent capacitance is C12 = [(C1)-1 + (C2) -1]-1 = 3.0 F, and the charge on the positive plate of each one is (3.0 F)(10 V) = 30 C. Next, the capacitor (call is C1) is squeezed as described in the problem, with the effect that the new value of C1 is 12 F (see Eq. 25-9). The new total equivalent capacitance then becomes C12 = [(C1) -1 + (C2) -1]-1 = 4.0 F, and the new charge on the positive plate of each one is (4.0 F)(10 V) = 40 C. (a) Thus we see that the charge transferred from the battery as a result of the squeezing is 40 C - 30 C = 10 C. (b) The total increase in positive charge (on the respective positive plates) stored on the capacitors is twice the value found in part (a) (since we are dealing with two capacitors in series): 20 C.
57. (a) Put five such capacitors in series. Then, the equivalent capacitance is 2.0 F/5 = 0.40 F. With each capacitor taking a 200-V potential difference, the equivalent capacitor can withstand 1000 V. (b) As one possibility, you can take three identical arrays of capacitors, each array being a five-capacitor combination described in part (a) above, and hook up the arrays in parallel. The equivalent capacitance is now Ceq = 3(0.40 F) = 1.2 F. With each capacitor taking a 200-V potential difference the equivalent capacitor can withstand 1000 V.
58. Equation 25-14 leads to C1 = 2.53 pF and C1 = 2.17 pF. Initially, the total equivalent capacitance is C12 = [(C1)-1 + (C2)-1]-1 = 1.488 pF, and the charge on the positive plate of each one is (1.488 pF )(10 V) = 14.88 pC. Next, capacitor 2 is modified as described in the problem, with the effect that the new value of C2 is 2.17 pF (again using Eq. 25-14). The new total equivalent capacitance is C12 = [(C1)-1 + (C2)-1]-1 = 1.170 pF, and the new charge on the positive plate of each one is (1.170 pF)(10 V) = 11.70 pC. Thus we see that the charge transferred from the battery (considered in absolute value) as a result of the modification is 14.88 pC 11.70 pC = 3.18 pC. (a) This charge, divided by e gives the number of electrons that pass point P. Thus, 3.18 10-12 = 2.0 107 . 1.6 10-19 (b) These electrons move rightwards in the figure (that is, away from the battery) since the positive plates (the ones closest to point P) of the capacitors have suffered a decease in their positive charges. The usual reason for a metal plate to be positive is that it has more protons than electrons. Thus, in this problem some electrons have "returned" to the positive plates (making them less positive).
59. (a) We do not employ energy conservation since, in reaching equilibrium, some energy is dissipated either as heat or radio waves. Charge is conserved; therefore, if Q = C1Vbat = 40 C, and q1 and q2 are the charges on C1 and C2 after the switch is thrown to the right and equilibrium is reached, then
Q = q1 + q2 .
Reducing the right portion of the circuit (the C3, C4 parallel pair which are in series with C2) we have an equivalent capacitance of C' = 8.0 F which has charge q' = q2 and potential difference equal to that of C1. Thus, V1 = V ' , or
q1 q2 = C1 C '
which yields 4q1 = q2. Therefore, Q = q1 + 4q1 . This leads to q1 = 8.0 C and consequently to q2 = 32 C. (b) From Eq. 25-1, we have V2 = (32 C)(16 F) = 2.0 V.
60. (a) We calculate the charged surface area of the cylindrical volume as follows: A = 2 rh + r 2 = 2 (0.20 m)(0.10 m) + (0.20 m) 2 = 0.25 m2 where we note from the figure that although the bottom is charged, the top is not. Therefore, the charge is q = A = 0.50 C on the exterior surface, and consequently (according to the assumptions in the problem) that same charge q is induced in the interior of the fluid. (b) By Eq. 25-21, the energy stored is U= q2 (5.0 10-7 C) 2 = = 3.6 10-3 J. 2C 2(35 10-12 F)
(c) Our result is within a factor of three of that needed to cause a spark. Our conclusion is that it will probably not cause a spark; however, there is not enough of a safety factor to be sure.
61. (a) In the top right portion of the circuit is a pair of 4.00 F which we reduce to a single 8.00 F capacitor (which is then in series with the bottom capacitor that the problem is asking about). The further reduction with the bottom 4.00 F capacitor results 8 in an equivalence of 3 F, which clearly has the battery voltage across it -- and therefore
8 has charge ( 3 F)(9.00 V) = 24.0 C. This is seen to be the same as the charge on the bottom capacitor.
(b) The voltage across the bottom capacitor is q 24.0 C V=C = = 6.00 V . 4.00 F
62. We do not employ energy conservation since, in reaching equilibrium, some energy is dissipated either as heat or radio waves. Charge is conserved; therefore, if Q = C1Vbat = 100 C, and q1, q2 and q3 are the charges on C1, C2 and C3 after the switch is thrown to the right and equilibrium is reached, then Q = q1 + q2 + q3 . Since the parallel pair C2 and C3 are identical, it is clear that q2 = q3. They are in parallel with C1 so that V1=V3, or q1 q3 C1 = C3 which leads to q1 = q3/2. Therefore, 1 Q = 2 q3 + q3 +q3 which yields q3 = 40 C and consequently q1 = 20 C.
63. The pair C3 and C4 are in parallel and consequently equivalent to 30 F. Since this numerical value is identical to that of the others (with which it is in series, with the battery), we observe that each has one-third the battery voltage across it. Hence, 3.0 V is across C4, producing a charge q4 = C4V4 = (15 F)(3.0 V) = 45 C .
64. (a) We reduce the parallel group C2, C3 and C4, and the parallel pair C5 and C6, obtaining equivalent values C' = 12 F and C'' = 12 F, respectively. We then reduce the series group C1, C' and C'' to obtain an equivalent capacitance of Ceq = 3 F hooked to the battery. Thus, the charge stored in the system is qsys = CeqVbat = 36 C . (b) Since qsys = q1 then the voltage across C1 is q1 36 C V1 = C = = 6.0 V . 6.0 F 1 The voltage across the series-pair C' and C'' is consequently Vbat - V1 = 6.0 V. Since C' = C'', we infer V' = V'' = 6.0/2 = 3.0 V, which, in turn, is equal to V4, the potential across C4. Therefore, q4 = C4V4 = (4.0 F)(3.0 V) = 12 C .
65. (a) The potential across C1 is 10 V, so the charge on it is q1 = C1V1 = (10.0 F)(10.0 V) = 100 C. (b) Reducing the right portion of the circuit produces an equivalence equal to 6.00 F, with 10.0 V across it. Thus, a charge of 60.0 C is on it -- and consequently also on the bottom right capacitor. The bottom right capacitor has, as a result, a potential across it equal to q 60 C V =C= = 6.00 V 10 F which leaves 10.0 V - 6.00 V = 4.00 V across the group of capacitors in the upper right portion of the circuit. Inspection of the arrangement (and capacitance values) of that group reveals that this 4.00 V must be equally divided by C2 and the capacitor directly below it (in series with it). Therefore, with 2.00 V across C2 we find q2 = C2V2 = (10.0 F)(2.00 V) = 20.0 C .
66. The pair C1 and C2 are in parallel, as are the pair C3 and C4; they reduce to equivalent values 6.0 F and 3.0 F, respectively. These are now in series and reduce to 2.0 F, across which we have the battery voltage. Consequently, the charge on the 2.0 F equivalence is (2.0 F)(12 V) = 24 C. This charge on the 3.0 F equivalence (of C3 and C4) has a voltage of q 24 C V=C= = 8.0 V . 3 F Finally, this voltage on capacitor C4 produces a charge (2.0 F)(8.0 V) = 16 C.
67. For maximum capacitance the two groups of plates must face each other with maximum area. In this case the whole capacitor consists of (n 1) identical single capacitors connected in parallel. Each capacitor has surface area A and plate separation d so its capacitance is given by C0 = 0A/d. Thus, the total capacitance of the combination is (in SI units) C = ( n -1) C0
( n -1) 0 A = (8 -1)(8.85 10-12 )(1.25 10-4 ) = 2.28 10-12 F. =
d 3.40 10-3
68. (a) Here D is not attached to anything, so that the 6C and 4C capacitors are in series (equivalent to 2.4C). This is then in parallel with the 2C capacitor, which produces an equivalence of 4.4C. Finally the 4.4C is in series with C and we obtain Ceq =
bCgb4.4 Cg = 0.82 C = 41 F
C + 4.4 C
where we have used the fact that C = 50 F. (b) Now, B is the point which is not attached to anything, so that the 6C and 2C capacitors are now in series (equivalent to 1.5C), which is then in parallel with the 4C capacitor (and thus equivalent to 5.5C). The 5.5C is then in series with the C capacitor; consequently, Ceq = . bCgb55 Cg = 0.85C = 42 F . . C + 55 C
69. (a) In the first case the two capacitors are effectively connected in series, so the output potential difference is Vout = CVin/2C = Vin/2 = 50.0 V. (b) In the second case the lower diode acts as a wire so Vout = 0.
70. The voltage across capacitor 1 is
V1 = q1 30 C = = 3.0 V . C1 10 F
Since V1 = V2, the total charge on capacitor 2 is
q2 = C2V2 = 20 F 2 V = 60 C ,
b
gb g
which means a total of 90 C of charge is on the pair of capacitors C1 and C2. This implies there is a total of 90 C of charge also on the C3 and C4 pair. Since C3 = C4, the charge divides equally between them, so q3 = q4 = 45 C. Thus, the voltage across capacitor 3 is
V3 = q3 45 C = = 2.3 V . C3 20 F
Therefore, |VA VB| = V1 + V3 = 5.3 V.
71. (a) The equivalent capacitance is Ceq = 6.00 F 4.00F C1C2 = = 2.40 F . C1 + C2 6.00 F + 4.00 F
b
gb
g
(b) q1 = CeqV = (2.40 F)(200 V) = 4.80 10-4 C. (c) V1 = q1/C1 = 4.80 10-4 C/6.00 F = 80.0 V. (d) q2 = q1 = 4.80 10-4 C. (e) V2 = V V1 = 200 V 80.0 V = 120 V.
72. (a) Now Ceq = C1 + C2 = 6.00 F + 4.00 F = 10.0 F. (b) q1 = C1V = (6.00 F)(200 V) = 1.20 103 C. (c) V1=200 V. (d) q2 = C2V = (4.00 F)(200 V) = 8.00 104 C. (e) V2 = V1 = 200 V.
73. We cannot expect simple energy conservation to hold since energy is presumably dissipated either as heat in the hookup wires or as radio waves while the charge oscillates in the course of the system "settling down" to its final state (of having 40 V across the parallel pair of capacitors C and 60 F). We do expect charge to be conserved. Thus, if Q is the charge originally stored on C and q1, q2 are the charges on the parallel pair after "settling down," then
Q = q1 + q2 C 100 V = C 40 V + 60 F 40 V
b
g b g b
gb g
which leads to the solution C = 40 F.
74. We first need to find an expression for the energy stored in a cylinder of radius R and length L, whose surface lies between the inner and outer cylinders of the capacitor (a < R 1 < b). The energy density at any point is given by u = 2 0 E 2 , where E is the magnitude of the electric field at that point. If q is the charge on the surface of the inner cylinder, then the magnitude of the electric field at a point a distance r from the cylinder axis is given by
E= q 2 0 Lr
(see Eq. 25-12), and the energy density at that point is given by u= q2 1 0E 2 = 2 2 2 . 2 8 0 L r
The energy in the cylinder is the volume integral
U R = udv.
Now, dv = 2rLdr , so UR =
z
R
a
q2 q2 2rLdr = 8 2 0 L2 r 2 4 0 L
z
R
a
dr q2 R = ln . r 4 0 L a
To find an expression for the total energy stored in the capacitor, we replace R with b: q2 b Ub = ln . 4 0 L a We want the ratio UR/Ub to be 1/2, so
ln R 1 b = ln a 2 a
or, since R = ab .
1 2
ln b / a = ln b / a , ln R / a = ln b / a . This means R / a = b / a or
b g d
i b g d
i
75. (a) Since the field is constant and the capacitors are in parallel (each with 600 V across them) with identical distances (d = 0.00300 m) between the plates, then the field in A is equal to the field in B:
E = V = 2.00 105 V m . d
(b) | E |= 2.00 105 V m . See the note in part (a). (c) For the air-filled capacitor, Eq. 25-4 leads to
=
q = 0 E = 177 10-6 C m2 . . A
(d) For the dielectric-filled capacitor, we use Eq. 25-29:
= 0 E = 4.60 10-6 C m2 .
(e) Although the discussion in the textbook (25-8) is in terms of the charge being held fixed (while a dielectric is inserted), it is readily adapted to this situation (where comparison is made of two capacitors which have the same voltage and are identical except for the fact that one has a dielectric). The fact that capacitor B has a relatively large charge but only produces the field that A produces (with its smaller charge) is in line with the point being made (in the text) with Eq. 25-34 and in the material that follows. Adapting Eq. 25-35 to this problem, we see that the difference in charge densities between parts (c) and (d) is due, in part, to the (negative) layer of charge at the top surface of the dielectric; consequently,
= 177 10-6 - 4.60 10-6 = -2.83 10-6 C m2 . .
c
h c
h
76. (a) The equivalent capacitance is Ceq = C1C2/(C1 + C2). Thus the charge q on each capacitor is
q = q1 = q2 = CeqV = C1C2V (2.00 F)(8.00 F)(300V) = = 4.80 10-4 C. C1 + C2 2.00 F + 8.00 F
(b) The potential difference is V1 = q/C1 = 4.80 104 C/2.0 F = 240 V. (c) As noted in part (a), q2 = q1 = 4.80 10-4 C. (d) V2 = V V1 = 300 V 240 V = 60.0 V. Now we have q'1/C1 = q'2/C2 = V' (V' being the new potential difference across each capacitor) and q'1 + q'2 = 2q. We solve for q'1, q'2 and V: (e) q '1 = 2C1q 2(2.00 F)(4.80 10-4C ) = = 1.92 10-4 C. C1 + C2 2.00 F + 8.00 F
(f) V1 =
q1 1.92 10-4 C = = 96.0 V. C1 2.00 F
(g) q '2 = 2q - q1 = 7.68 10-4 C. (h) V2 = V1 = 96.0 V. (i) In this circumstance, the capacitors will simply discharge themselves, leaving q1 =0, (j) V1=0, (k) q2 = 0, (l) and V2 = V1 = 0.
1 77. We use U = 2 CV 2 . As V is increased by V, the energy stored in the capacitor 1 increases correspondingly from U to U + U: U + U = 2 C (V + V ) 2 . Thus,
(1 + V/V)2 = 1 + U/U, or V U = 1+ - 1 = 1 + 10% - 1 = 4.9% . V U
78. (a) The voltage across C1 is 12 V, so the charge is
q1 = C1V1 = 24 C .
(b) We reduce the circuit, starting with C4 and C3 (in parallel) which are equivalent to 4 F . This is then in series with C2, resulting in an equivalence equal to 4 F which 3 4 would have 12 V across it. The charge on this 3 F capacitor (and therefore on C2) is ( 4 F)(12 V) = 16 C. Consequently, the voltage across C2 is 3
V2 = q2 16 C = = 8 V. C2 2 F
This leaves 12 8 = 4 V across C4 (similarly for C3).
79. We reduce the circuit, starting with C1 and C2 (in series) which are equivalent to 4 F. This is then parallel to C3 and results in a total of 8 F, which is now in series with C4 and can be further reduced. However, the final step in the reduction is not necessary, as we observe that the 8 F equivalence from the top 3 capacitors has the same capacitance as C4 and therefore the same voltage; since they are in series, that voltage is then 12/2 = 6.0 V.
80. We use C = 0A/d /d. To maximize C we need to choose the material with the greatest value of /d. It follows that the mica sheet should be chosen.
81. We may think of this as two capacitors in series C1 and C2, the former with the 1 = 3.00 material and the latter with the 2 = 4.00 material. Upon using Eq. 25-9, Eq. 25-27 and then reducing C1 and C2 to an equivalent capacitance (connected directly to the battery) with Eq. 25-20, we obtain Ceq = 1 2 0 A = 1.52 10-10 F . 1 + 2 d
Therefore, q = CeqV = 1.06 10-9 C.
82. (a) The length d is effectively shortened by b so C' = 0A/(d b) = 0.708 pF. (b) The energy before, divided by the energy after inserting the slab is U q 2 / 2C C 0 A /(d - b) d 5.00 = 2 = = = = = 1.67. U q / 2C C 0 A / d d - b 5.00 - 2.00 (c) The work done is W = U = U - U = q2 2 1 1 q2 q 2b - = = -5.44 J. (d - b - d ) = - C C 2 0 A 2 0 A
(d) Since W < 0 the slab is sucked in.
83. (a) C' = 0A/(d b) = 0.708 pF, the same as part (a) in problem 82. (b) Now,
2 1 0 A / d U C d - b 5.00 - 2.00 2 CV =1 = = = = = 0.600. 2 U 2 C V C 0 A /(d - b) d 5.00
(c) The work done is W = U = U '- U =
A AbV 2 1 1 1 - V2 = 0 = 1.02 10-9 J. (C - C )V 2 = 0 2 2 d -b d 2d ( d - b)
(d) In Problem 82 where the capacitor is disconnected from the battery and the slab is sucked in, F is certainly given by -dU/dx. However, that relation does not hold when the battery is left attached because the force on the slab is not conservative. The charge distribution in the slab causes the slab to be sucked into the gap by the charge distribution on the plates. This action causes an increase in the potential energy stored by the battery in the capacitor.
84. We do not employ energy conservation since, in reaching equilibrium, some energy is dissipated either as heat or radio waves. Charge is conserved; therefore, if Q = 48 C, and q1 and q3 are the charges on C1 and C3 after the switch is thrown to the right (and equilibrium is reached), then
Q = q1 + q3 .
1 We note that V1 and 2 = V3 because of the parallel arrangement, and V1 = 2 V1 and 2 since they are identical capacitors. This leads to
2V1 = V3 2 q1 q3 = C1 C3 2q1 = q3
where the last step follows from multiplying both sides by 2.00 F. Therefore,
Q = q1 + (2q1 )
which yields q1 = 16.0 C and q3 = 32.0 C.