head: Running WRITING STYLE AND MECHANICS
Typically, the running head is required only for publication. Check with your
instructor regarding the preference for using a running head. Doctoral students
must include the running head. The words Running head only appear on the
title page. Use no more than the first 50 characters of the title.
The title is in upper and lower case
letters, centered between the left and
right margins, and positioned on the
upper half of the page. Use black, 12point Times New Roman font
throughout. Arial and Courier font
types are acceptable. Doctoral
students: See the note below about
formatting the title page for your
program requirements.
1
Pagination and Page
Header: Use the header
feature in Microsoft Word
to set the page number and
to add the running head if
one is included. See
Appendix A for directions.
Writing Style and Mechanics
Student Name
Course/Number
Date
Instructor Name*
REQUIRED TITLE PAGE INFORMATION
As shown above, center the following elements on the page in this order:
Title of Paper (mixed upper and lower case letters)
Your Name (first and last name without including academic or license information such as BSN
or RN)
Course Abbreviation and Number
Due Date (month, day, and year)
Instructors Name
*Doctoral students must format the title page according to APA guidelines as follows: title,
authors name, and institution name.
All lines are double-spaced throughout the entire document . Use black, 12-point Times New
Roman font throughout the document. Arial and Courier font types are acceptable.
The Writing Style and Mechanics paper provided by the Center for Writing Excellence represents the consensus of several deans
and other key academic officials within Apollo Group. The sample paper corresponds to APA style, which is the Universitys
preferred style. This document may contain more than 20% of its information from a single source. The sample paper is written to
help you format your paper. Typically, an academic paper will include information from a variety of sources and should not co ntain
more than 20% of its information from a single source.
Although this sample paper is offered as a tool to help students with style, it is not a definitive or binding representation of format
accepted by individual instructors. As a result, for all unresolved style and format issues, it is essential that you consult with your
instructor before submitting your paper for a grade. Your instructor is the final authority regarding acceptable format and style for
papers associated with a course, and the instructor's recommendations will prevail over this sample pa per in the event that
differences occur between the two.
Revised: December 2010
Center for Writing Excellence
2009-2010 Apollo Group, Inc. All rights reserved.
WRITING STYLE AND MECHANICS
2
Abstract
According to the Publication Manual of the American Psychological Association (APA), An
abstract is a brief, comprehensive summary of the contents of the article; it allows readers
to survey the contents of an article quickly and, like a title, it enables persons interested in
the document to retrieve it from abstracting and indexing databases (2010, p. 25). The first
line of the abstract is not indented. An abstract may range from 150 to 250 words (APA,
2010). Because an abstract is not always required for student papers, adhere to your
instructors requirements.
WRITING STYLE AND MECHANICS
Writing Style and Mechanics
Indent the first
line of each
paragraph using
the tab key. The
tab key is
usually set at
five to seven
spaces or onehalf inch.
3
Do not include Introduction as a level heading.
Instead, begin the text of the paper by
repeating the title from your title page. The title
of the paper is centered but not bolded.
The Publication Manual of the American Psychological Association (APA) began as
a journal article in 1929. That article reported results from a meeting of scholars to
establish a simple set of procedures, or style rules, that would codify the many components
Quotations: All
quotations
require a page
number or
paragraph
number.
of scientific writing to increase the ease of reading comprehension (APA, 2010, p. xiii).
Today the Publication Manual is in its sixth edition, and the APA style described in it is a
widely recognized standard for scholarly or professional writing in the social sciences.
Although the style guide is designed to prepare manuscripts for publication, many
universities and health care journals have adopted its use as a guide to achieve uniformity
and consistency (Cuddy, 2002). Writing in the style prescribed by the Publication Manual
can be a daunting experience for students. As with any new skill, practice makes perfect
Use one space
or two spaces
after a period
at the end of a
sentence. Be
consistent with
usage
throughout the
document.
Doctoral
students
should use two
spaces after
sentenceending
punctuation in
the body of the
paper.
(S. Proofreader, personal communication, June 28, 2004). Points of APA style most often
used by undergraduate and graduate students are listed below. However, keep in mind that
this sample paper is a guide and should not be considered as a replacement for the
Publication Manual.
Format Considerations
Level One Heading: Level one
headings are centered and bolded in
upper and lower case letters.
.
Some commonly used rules and formats from the sixth edition of the Publication
Manual are listed below. Please note, however, that some assignments may require unique
formatting, and you should consult with your instructor for clarification.
Correct Margins
Margins: Use
one-inch
margins on all
sides of the
document.
Level Two Heading: Level two headings are placed at the
left margin and bolded in upper and lower case letters.
Margins are one inch on all sides. This rule is broken only to avoid placing a lone
heading on the last line of the page or a single line of text on the top of the next page.
Personal
communication:
A personal
communication is
not included on
the reference
page.
WRITING STYLE AND MECHANICS
4
Page Header
The page header contains the running head and the page number. Check with your
instructor to see if a running head is required. The header is set using the header feature in
Microsoft Word. Consult Appendix A for format directions for the header feature. The
words Running head only appear on the title page. Use no more than the first 50 characters
of the title in running head. The page number is set at the right margin, and the running head
is set at the left margin. The automatic header function of a word-processing program should
be used to place the page numbers consecutively in the paper. Arabic numerals (1, 2, 3, and
so on) are used to number each page, beginning with 1 on the title page.
Reference Page
Hanging indentation is used for the reference page. (See Appendix B for format
directions to create hanging indents.) In a hanging indent, the first line of the reference rests
against the left margin, and the lines that follow are indented five to seven spaces or one-half
inch to the first tab stop. The reference page is alphabetized by author or by title of the work
when no author is listed, and each entry contains the date of publication in parentheses
directly after the authors name. The title, the place of publication, and the name of the
publisher follow the date of publication for a book entry. The proliferation of electronic
materials has prompted APA to create formats designed specifically for Internet and webbased written material. Visit the APA website at www.apastyle.org for additional
information about formatting electronic references. You will also find frequently asked
questions and helpful free tutorials about using APA style.
Only references that have been cited in the paper are listed on the reference page.
Personal communications are cited in the text but do not appear on the reference page
WRITING STYLE AND MECHANICS
5
because the reader cannot retrieve them. Additional reference examples are available in the
Reference and Citation Examples tutorial in the Center for Writing Excellence at Tutorials
& Guides.
Level Three
Heading:
Level three
headings are
indented and
bolded.
Capitalize only
the first word,
include a
period at the
end, and
continue the
text without
using a hard
return.
In-Text Citations
Direct quotations. Direct quotations must mirror the original source word for word,
even if errors are contained in the original text. To alert the reader that errors are part of the
original material, the word [sic], enclosed in brackets and italicized, must follow the
erroneous material. The source of the quotation must be cited. The format of direct
quotations may vary with the placement of the quoted material in the sentence. The
following is an example of how you may use a direct quotation from a website with an
author: Diversity is emerging as one of the most serious issues in the workplace today, yet
most employers are not prepared to deal with it (Copeland, 2003, Erroneous Assumptions,
para. 1). The authors last name, the year of publication, the website title or section title, and
the paragraph number, when no page number is available, are included in the citation.
The following is an example of how one may use a direct quotation from a book with
one author: Venes (2001) stated, The types of influenza doctors must prepare for fall into
three categories (p. 106). If the authors name is stated prior to the quotation, include the
date of publication (in parentheses) after the authors name, and follow the quotation with
the page or paragraph number. For a work with two authors, use both authors last names for
every citation. If the source has three or more authors but fewer than six authors, list all
authors in the first citation, and use the first authors last name and the words et al. (without
italics) for the rest of the citations. If the source has more than six authors, you may use the
first authors last name and the words et al. (without italics) for every citation (APA, 2010,
Erroneous
Assumptions
is the heading
of a section
within the webbased article,
Managing a
Multicultural
W orkforce.
Using the
heading of a
section for an
online article
will help your
reader quickly
locate the
content in the
original source.
WRITING STYLE AND MECHANICS
6
p. 175). Refer to the Reference and Citation Examples tutorial in the Center for Writing
Excellence at Tutorials & Guides for examples of in-text citations.
Quotations that contain fewer than 40 words are enclosed in double quotation marks
within the text. Use single quotation marks for quotations contained within a direct
quotation. Quotations of 40 words or more are indented in a block format without quotation
marks. Use double quotation marks to indicate a quotation within the block quotation. The
block quotation is started on a new line, and it is indented five to seven spaces or one-half
inch. A sample block quotation appears on page 8 of this document.
Paraphrased material. Paraphrasing allows the writer to present someone elses
W rite out and
with authors
names
mentioned
within the
text. Use an
ampersand (&)
when they are
written within a
citation.
ideas or intellectual property and to supply proper credit to the original author or authors
(Lawton, Cousineau, & Hillard, 2001). When an author is paraphrased, the source must be
cited in the text. If a source is mentioned more than once in a paragraph, a citation must be
included each time. Page or paragraph numbers are not required for paraphrased material,
but the Publication Manual recommends that writers include a page or paragraph number to
help the reader easily locate the information (APA, 2010, p. 171). If a writer were to
paraphrase information from an article located in an online database, the writer would
format the citation as follows: Daniels (2004) included Darden Restaurants on her list of the
50 best companies for minorities. Here is an example where the author is not mentioned
within the text: A list of companies has been singled out as best for minority employees
(Daniels, 2004). Both examples include the authors last name and the date of publication. If
the authors name is not provided with the paraphrased text, it must be included in the
citation. Refer to the Reference and Citation Examples tutorial in the Center for Writing
Excellence at Tutorials & Guides for examples of paraphrasing.
WRITING STYLE AND MECHANICS
7
Plagiarism. Plagiarism constitutes a serious academic concern. According to
Lawton, Cousineau, and Hillard (2001), Academic communities demand that writers credit
others for their work and that the source of their material clearly be acknowledged (para.
6). Internet access has resulted in an increase in plagiarism. McCabe noted (as cited in
Electronic
source and
quotation: If
the electronic
source does not
have page
numbers, use
the abbreviation
para. for the
paragraph
number.
Sterngold, 2004), 41% of students said they engaged in cut-and-paste plagiarism from
online sources. The sentences and phrases used in ones paper must be original or cited and
referenced accordingly. Although it may be easier for a writer to use someone elses words,
doing so discredits the writer. When in doubt, cite. See the Plagiarism Guide in the Center
for Writing Excellence at Tutorials & Guides for more information about avoiding
plagiarism and about properly citing intellectual property.
Other Format Issues
The preferred typeface for APA style is black, 12-point Times New Roman (APA,
2010). However, Arial and Courier font types are acceptable. Avoid using any software
settings that reduce spacing between words or letters or that add spacing between
paragraphs. Use double-spacing throughout the document. You may use one space or two
spaces after sentence-ending punctuation in the body of your essay, but use consistent
spacing at the end of a sentence throughout your essay. For consistency with APA style,
Doctoral students must space twice after sentence-ending punctuation in the body of an
essay and space once after a period separating each main element in the reference list.
Although the Publication Manual (2010) requires an abstract to precede the text, an
abstract is not used in most student papers. Instructors may require an abstract if students are
submitting lengthy papers or project proposals. In those cases, the direction to submit an
abstract will be in the assignment guidelines.
Secondary
Sources: A
secondary source
is also called an
indirect source. List
only the primary
source in the
reference list, and
cite the author of
the secondary
source only within
the text. Secondary
sources are not
ideal in academic
writing and should
be avoided.
WRITING STYLE AND MECHANICS
8
Writing Mechanics
Correct grammar, punctuation, spelling, and sentence structurein addition to
formattingare essential components of scholarly writing. Strunk (1918/1999) emphasized
the importance of being succinct:
Vigorous writing is concise. A sentence should contain no unnecessary words, a
Block quotation:
Block quotations
are indented to
the tab margin
and do not
contain quotation
marks. The in-text
citation occurs
outside of the
punctuation that
ends the
sentence.
paragraph no unnecessary sentences, for the same reason that a drawing should have
no lines unnecessary and a machine no unnecessary parts. This requires not that the
writer make all his sentences short, or that he avoid all detail and treat his subjects
only in outline, but that every word tell. (para. 1)
Grammar
In addition to the provision of a standardized format for scientific writing, the
Publication Manual (2010) emphasizes the importance of proper grammar. For a thorough
grammar review, refer to the Grammar and Writing Guides in Tutorials & Guides from the
Center for Writing Excellence homepage. The Grammar and Writing Guides are resources
that review grammar, mechanics, and style, and each section contains practice quizzes.
Important basic grammar principles are listed below.
Subject and verb agreement. A singular noun requires a singular verb, and a plural
noun requires a plural verb (APA, 2010). Words that intervene between the noun and the
verb do not change this basic rule.
Noun and pronoun agreement. When writers use a singular noun, they must also
use a singular pronoun. To avoid using he/she (he or she) or him/her (him or her), writers
may reword the sentence and use a plural noun and a plural pronoun to eliminate the
problem of nouns and pronouns that do not agree. For example, the sentence A student
WRITING STYLE AND MECHANICS
9
applying for a job must carefully proofread his or her application may be reworded to read,
Students applying for jobs must carefully proofread their applications. Use of plural forms
also helps writers reduce bias, avoid stereotypes, and refrain from using both singular and
plural in the same sentence or paragraph.
Passive voice. Passive voice obscures the actor in this sentence: The house was
painted, because it omits who applied the paint. In contrast, the same sentence written in
active voice would be something such as this: Our company painted the house. The
passive voice, which is a form of be (is, was, were, will be, have been, etc.) and a
participle (painted, etc.), is useful when the actor's identity is not important to the sentence
or context. Overuse of the passive voice causes the document to read similarly to an
instructional manual, dry and monotonous. According to Sigel (2009), it weakens the
essays argument and prevents clear and concise writing. Occasional use of the passive
voice is acceptable, but documents written primarily in the active voice are more enjoyable
and more persuasive to read (Sigel, 2009).
Punctuation. Correct punctuation establishes the rhythm and readability of
sentences. Use only one space after commas, colons, and semicolons. Use one or two spaces
after a period at the end of a sentence (be consistent with use). When a hyphen or a dash is
used, no space appears before or after the hyphen or dash (APA, 2010). Correct use of
commas and semicolons can be challenging for students. Writers are encouraged to
proofread their papers to ensure proper use of commas (Purdue OWL, 2009).
Capitalization. Capitalization is used to designate a proper noun or trade name as
well as major words in titles and in headings. Instances where capitalization is not used
include laws, theories, models, or hypotheses, such as ethical decision-making models and
WRITING STYLE AND MECHANICS
10
names of conditions or groups in an experiment, such as experimental or control groups
(APA, 2010). A common error in capitalization is its use with the name of a job title or
department. An example is human resources, which is not capitalized, versus the specific
title of ACME Human Resources Department, which is capitalized.
Seriation (elements written in a series). Items contained in a list help to clarify the
point being made or help to clarify components of a subject. Bullets may be used for a list in
academic writing according to APA standards (2010). To show seriation of separate
paragraphs, however, number each paragraph with an Arabic numeral followed by a period
that is not enclosed in or followed by parentheses. To show seriation within a paragraph or a
sentence, use lowercase letters in parentheses. An example of seriation is shown in
Appendix C.
Numbers. Spell out numbers one through nine that appear in the body text. Use
Arabic numerals to express numbers 10 and above. Exceptions to this rule are discussed in
the Grammar and Writing Guides in the Center for Writing at Tutorials & Guides. Once in
the Grammar and Writing Guides, go to Grammar Mechanics and select Number Usage for
a list of the exceptions. If you have the Publication Manual, sixth edition (2010), refer to
pages 111-114 for detailed information about number usage.
Third person versus first person. Person refers to the point of view or the source
of the writers opinions. Use third person (he, she, they) in academic writing. When
referring to yourself, however, stating The writer instructed the patients is ambiguous and
may give the impression that you did not participate. Instead, use a first person personal
pronoun: I instructed the patients. For the most part, reference to self in first person should
be limited to personal reflection or opinion papers.
WRITING STYLE AND MECHANICS
TIP: Always include a conclusion that summarizes the main
points of the paper. Check with your instructor regarding the
preference for the inclusion of a Conclusion heading.
11
Conclusion
By understanding mechanics and usage requirements and by referencing materials
appropriately with in-text citations and reference entries, you will clearly communicate the
content of your work. Use the information included in this paper to develop effective
academic papers. You are also encouraged to refer to the resources in the Center for Writing
Excellence and the style information from www.apastyle.org for additional information
about academic writing.
WRITING STYLE AND MECHANICS
Reference Page: Use a separate page to list the references and doublespace the entire page. Note that throughout the paper and the reference
list, titles of non-periodicals and the names of journals, book titles, and
volume numbers are set in italics rather than being underlined.
12
References
American Psychological Association. (2010). Publication manual of the American
Psychological Association (6th ed.). Washington, DC: Author.
Book with a
corporate author
Book with an edition
Copeland, L. (2006). Managing a multicultural workforce. California Job Journal.
Retrieved from http://www.jobjournal.com
Online Journal Article
Cuddy, C. M. (2002). Demystifying APA style. Orthopaedic Nursing, 21(5), 35-42.
Retrieved from http://www.orthopaedicnursing.com
Daniels, C. (2004, June 28). 50 Best companies for minorities. Fortune, 149(13), 136146. Retrieved from http://money.cnn.com/magazines/fortune
Lawton, K. A., Cousineau, L., & Hillard, V. E. (2001). Plagiarism: Its nature and
A source
available on
a university
program or
department
website
consequences. Retrieved from Duke University Guide to Library Research website:
http://www.lib.duke.edu/libguide/plagarism.htm
Purdue OWL. (2009). Commas: Quick rules. Retrieved from Purdue University Online
Writing Lab website:
http://owl.english.purdue.edu/handouts/grammar/g_commaproof.html
Sigel, T. (2009). How passive voice weakens your scholarly argument. Journal of
Management Development, 28(5), 478-480. doi:10.1108/02621710910955994
Sterngold, A. (2004). Confronting plagiarism: How conventional teaching invites cybercheating. Change, 36(3), 16. Retrieved from http://www.changemag.org
Strunk, W., Jr. (1999). Elementary principles of composition: Omit needless words. In The
elements of style. Retrieved from http://www.bartelby.com/141/strunk5.html#13
(Original work published 1918)
A source
with a digital
object
identifier
(DOI)
WRITING STYLE AND MECHANICS
13
Venes, D. (2001). Taber's cyclopedic medical dictionary (19th ed.). Philadelphia, PA: F.A.
Davis.
WRITING STYLE AND MECHANICS
14
Appendix A: Header Feature in Microsoft Word
Page Headers
Identify each page with the running head at the left margin and the page number
placed at the right margin. (Use a running head only if your instructor requires it or if you
are a doctoral student.) Do not use your name to identify each page. Be sure the font type
and size are the same in the header as that used throughout the document.
Word 2003
To create a correct header with an automatic page number in Word 2003, use the
following guidelines:
1. Select the View menu on the toolbar.
2. Select Header and Footer. (If you are not creating a running head, skip to number 8
below.)
3. Place the cursor in the Header box and select the left justification button on the
toolbar so that the cursor in the Header box moves to the left.
4. Type the running head, if required. Otherwise, continue with number 8 below.
5. Select the Page Setup icon (the sixth icon in the Header and Footer toolbar).
6. Select the different first page option in the Layout tab to make the first page header
different from the rest of the document.
7. Adjust the first page header to include the words Running head (without italics) with
the first 50 characters of the title, and adjust the header on the second page to include
the first 50 characters of the title.
8. Tab to the right so that the cursor in the Header box moves to the right margin.
9. Use the automatic function for inserting the page number as illustrated in this picture
by selecting the first button with the # symbol.
10. Select Close. Your header is complete.
Word 2007
To create a correct header with an automatic page number feature in Word 2007, use
the following guidelines:
1. Click on the Insert tab.
2. Select the Header icon.
WRITING STYLE AND MECHANICS
15
3. Choose the Blank header tab from the drop-down menu. This places the cursor inside
the header at the left margin.
4. Type the running head (the first 50 characters of the title in all capital letters. Do not
yet include the words, Running head:), if required. Otherwise, continue with number
7 below.
5. Tab to the right margin, and click the Page Number icon.
6. Place the cursor over Current Position. A drop-down menu should appear.
7. Select the Plain Number option. A number 1 will appear at the right margin of your
document. (Once the different first page has been created, this number will change to
2, 3 . . . when the document is typed.)
8. From the Design menu for Header & Footer, select the option labeled Different first
page.
9. Create the new first page header to include the words Running head: (do not,
however, use italics) and, as before, the first 50 characters of the title in all capital
letters.
10. Once again, tab to the right margin, and click the Page Number icon.
11. Place the cursor over Current Position. A drop-down menu should appear.
12. Select the Plain Number option. A number 1 will appear at the right margin of your
document.
13. Choose Close Header and Footer (the red X at the far right on the menu). Your
cursor then appears at the beginning of the document, and automatic page numbers
should be visible as you type each new page.
14. Verify that the page numbers at the right of the header for page 1 and for page 2 are
at the same location for the right margin. (If not, use the ruler bar to make
adjustments.)
Word 2010
To create a correct header with an automatic page number feature in Word 2010, use
the following guidelines:
1. Click on the Insert tab.
2. Select the Header icon.
3. Choose the Blank header tab from the drop-down menu. This places the cursor inside
the header at the left margin.
4. Type the running head (the first 50 characters of the title in all capital letters. Do not
yet include the words, Running head:), if required. Otherwise, continue with number
7 below.
WRITING STYLE AND MECHANICS
16
5. Tab to the right margin, and click the Page Number icon.
6. Place the cursor over Current Position. A drop-down menu should appear.
7. Select the Plain Number option. A number 1 will appear at the right margin of your
document. (Once the different first page has been created, this number will change to
2, 3 . . . when the document is typed.)
8. From the Design menu for Header & Footer, select the option labeled Different first
page.
9. Create the new first page header to include the words Running head: (do not,
however, use italics) and, as before, the first 50 characters of the title in all capital
letters.
10. Once again, tab to the right margin, and click the Page Number icon.
11. Place the cursor over Current Position. A drop-down menu should appear.
12. Select the Plain Number option. A number 1 will appear at the right margin of your
document.
13. Choose Close Header and Footer (the red X at the far right on the menu). Your
cursor then appears at the beginning of the document, and automatic page numbers
should be visible as you type each new page.
14. Verify that the page numbers at the right of the header for page 1 and for page 2 are
at the same location for the right margin. (If not, use the ruler bar to make
adjustments.)
WRITING STYLE AND MECHANICS
17
Appendix B: Directions for a Hanging Indent
Microsoft Word 2003
Select the text that requires a hanging indent or create a hanging indent at the top of
the references page before typing the text. From the Format menu, select the Paragraph
command (as shown in Picture One). In the Special list under Indentation, select Hanging
(Picture Two).
Picture One
Picture Two
WRITING STYLE AND MECHANICS
18
Microsoft Word 2007
Select the text that requires a hanging indent or create a hanging indent at the top of
the references page before typing the text. From the Home menu, click on the Paragraph
command (see Picture One). This will bring up the Indents and Spacing tab (see Picture
Two). Under Indentation in the Special box, click on Hanging and choose OK.
Picture One
Picture Two
WRITING STYLE AND MECHANICS
19
Microsoft Word 2010
Select the text that requires a hanging indent or create a hanging indent at the top of
the references page before typing the text. From the Page layout menu, click on the
Paragraph command seen below. This will bring up the Indents and Spacing tab. Under
Indentation in the Special box, click on Hanging and choose OK.
WRITING STYLE AND MECHANICS
20
Appendix C: Seriation
Seriation
To show seriation (lists) within a paragraph or sentence, use lowercase letters, not
italicized, in parentheses:
Job satisfaction is increased when nurses are provided with (a) therapeutic massage,
(b) relaxation therapy, and (c) music therapy.
To show seriation of separate paragraphs, number each paragraph with an Arabic
numeral, followed by a period but not enclosed in or followed by parentheses. A numbered
list signifies that element 1 is more important than element 2 and so on. See the following
examples to create a numbered or bulleted list.
Berk (2001) suggests that parents determine suitability of books for children by
using the following criteria:
1. Books are made from durable material . . . [paragraph continues]
2. Books are action-oriented . . . [paragraph continues]
If all elements in the list are of equal importance, use bullets instead of numbers as shown
below.
Berk (2001) suggests that parents determine suitability of books for children by
using the following criteria:
Books are made from durable material . . . [paragraph continues]
Books are action-oriented . . . [paragraph continues]