Skills 10.7.1: Integration Challenge-Network Planning and Interface Configuration
Topology Diagram
Addressing Table
Device R1 Interface Fa0/0 S0/0/0 S0/0/1 Fa0/0 Fa0/1 S0/0/0 S0/0/1 Fa0/0 S0/0/0 S0/0/1 NIC NIC NIC NIC IP Address Subnet Mask Default Gateway N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
R2
R3 PC-1A PC-1B PC-1C Eagle_Server
All contents are Copyright 20072009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 1 of 3
CCNA Exploration Network Fundamentals: Planning and Cabling Networks
10.7.1: Skills Integration Challenge-Network Planning and Interface Configuration
Learning Objectives
Upon completion of this lab, you will be able to: Build the network topology Plan the IP addresses Configure router and PC interfaces Test the network
Background
Practice your network building, planning, and configuration skills. Device names and routing have already been configured.
Task 1: Build the Network Topology.
Use the following charts, and the devices in the Device Pool, to create the topology. Routers: Hostname R1 R1 R1 R2 R2 R2 R3 Switches: Hostname SW-1 SW-2A SW-2B SW-3 Interface Fa0/2 Fa0/2 Fa0/2 Fa0/2 Connects To PC-1A PC-1B Eagle_Server PC-1C Interface FastEthernet FastEthernet FastEthernet FastEthernet Interface Fa0/0 S0/0/0 (DCE) S0/0/1 (DCE) Fa0/0 S0/0/1 (DCE) Fa0/1 Fa0/0 Connects To SW-1 R2 R3 SW-2A R3 SW-2B SW-3 Interface Fa0/1 S0/0/0 S0/0/1 Fa0/1 S0/0/0 Fa0/1 Fa0/1
All contents are Copyright 20072009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 2 of 3
CCNA Exploration Network Fundamentals: Planning and Cabling Networks
10.7.1: Skills Integration Planning Challenge-Network and Interface Configuration
Task 2: Create and Assign an Addressing Scheme.
You are asked to use the 192.168.1.0 /24 address space. Seven total networks are required; assign the networks in decreasing order of number of hosts required for efficient use of address space. Use the following charts to create an effective addressing scheme: LAN: Hostname R1 R2 R3 WAN: Hostname R1-R2 R1-R3 R2-R3 Address to be Assigned R1-First host address R1-First host address R2-First host address Number of Hosts 2 2 2 Interface Fa0/0 Fa0/0 Fa0/1 Fa0/0 Number of Hosts 60 10 25 7
Use the following rules to assign the IP addresses. PC's will use the first host address in the subnet. Tthe server will use the second to last host address in its subnet. All FastEthernet ports on a router will use the last host address of the assigned subnet. The R1-R2 link will use the first WAN subnet, with R1 using the first usable address and R2 using the last usable adress. The R1-R3 link will use the second WAN subnet, with R1 using the first usable address and R3 using the last usable address. The R2-R3 link will use the third WAN subnet, with R2 using the first usable address and R3 using the last usable address. DCE interfaces should have clock rates of 56000.
Task 3: Interface Configuration
Perform interface configuration of the R1, R2, and R3 routers, the PCs, and the server according to the addressing scheme above.
Task 4: Testing Connectivity
Make sure all PCs can ping their gateways, other PCs, and the server.
All contents are Copyright 20072009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 3 of 3