Eliminator_i_EDS

Eliminator_i_EDS - KEY FEATURES 15-inch Two-way High-output...

Info iconThis preview shows pages 1–2. Sign up to view the full content.

View Full Document Right Arrow Icon
Eliminator i General Product Description The Electro-Voice Eliminator i is a high-peak output, high-efficiency two-way stage system. The 15-in. low-frequency/horn-loaded constant-directivity high-frequency system incorporates elements of Ring-Mode Decoupling (RMD TM ). RMD techniques substantially improve vocal fundamental intelligibility and produce an “up front” tonality capable of cutting through even difficult acoustic environments. The Eliminator i enclosure has a unique design that presents a very minimal frontal cross section while still maintaining substantial internal volume. A newly developed handle concept allows for extremely comfortable transportation from any orientation. The design is light weight, but very rugged and features a heavy metal grille and highly stylized corner protection. The heart of Eliminator i ’s high performance design is the combination of a high-excursion low-frequency suspension system with Electro-Voice’s unique Ring-Mode Decoupling. All loudspeaker drivers exhibit mechanical resonance modes that add their own time-domain or ringing-mode colorations. These colorations limit and reduce overall system intelligibility. The Eliminator i uses RMD to control several fundamental mechanical ringing modes. The result is substantially improved vocal range intelligibility and system “openness”. When extended low-frequency operation is required, the performance can be further enhanced with the use of the Eliminator i Sub, which can be used in either biamp or full-range passive mode. Vented enclosures offer excellent power handling and low distortion in the lowest octave of rated operation. However, it is always advisable to filter material below enclosure tuning to further improve system output and headroom. The Eliminator i should be high-pass filtered to reduce subsonic material below 40 Hz. Architects’ and Engineers’ Specifications The loudspeaker system shall consist of a 38.1-cm (15-inch) low-frequency transducer in a vented enclosure. The high-frequency section shall be a compression driver with a pure titanium diaphragm coupled to a 1-inch throat diameter to a constant-directivity horn having a horizontal included angle (as referenced to -6 dB) of 60° and a vertical included
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full Document Right Arrow Icon
Image of page 2
This is the end of the preview. Sign up to access the rest of the document.

{[ snackBarMessage ]}

Page1 / 2

Eliminator_i_EDS - KEY FEATURES 15-inch Two-way High-output...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online