lab 3 mesh and node analysis

# Lab 3 mesh and node - Experiment 3 Node-Voltage and Mesh-Current Methods EE 300 Basic Electrical Engineering Lab Scott Finnesand Date Instructor

This preview shows pages 1–3. Sign up to view the full content.

Experiment # 3 Node-Voltage and Mesh-Current Methods EE 300 Basic Electrical Engineering Lab Scott Finnesand Date: 2/12/08 Instructor: Barun Ranjikar

This preview has intentionally blurred sections. Sign up to view the full version.

View Full Document
Objective: The objective of this experiment is to relate nodal and mesh analysis techniques to actual circuits. This will be accomplished in out usual fashion, by first analyzing the circuits numerically “by hand”, then in lab, these same circuits will then be constructed, resulting in experimental values that can be compared to theoretical results. Introduction: This lab relates two different circuit analysis techniques, mesh analysis and nodal analysis. Both techniques result in the same answers. Nodal analysis is an organized method of using Kirchhoff’s current law. Mesh analysis is an organized method of using Kirchhoff’s voltage law. They allow us a more effective way of using Kirchhoff’s laws and allow for more application. Pre-lab : See attachment Procedures: Node-Voltage Method 1. Construct the circuit shown in Figure 1 2. Measure the node-voltage V A and V B using a digital multi-meter in the voltmeter mode 3. Measure the branch currents I1, I2, I3, I4, and I5 using a digital multi-meter in the
This is the end of the preview. Sign up to access the rest of the document.

## This note was uploaded on 04/15/2008 for the course EE EE 300 taught by Professor Davoux during the Spring '08 term at SD State.

### Page1 / 3

Lab 3 mesh and node - Experiment 3 Node-Voltage and Mesh-Current Methods EE 300 Basic Electrical Engineering Lab Scott Finnesand Date Instructor

This preview shows document pages 1 - 3. Sign up to view the full document.

View Full Document
Ask a homework question - tutors are online