Ellis industrial design group project

Ellis industrial design group project - Physical...

Info iconThis preview shows pages 1–2. Sign up to view the full content.

View Full Document Right Arrow Icon
Physical description Our final design consists of two long channels that are adjustable in length in order to accommodate the various sizes of surfboards that range from five feet long, to almost ten. There are two sets of bracket like hooks that are coated in non-skid urethane rubber to hold the board securely and to prevent marring. Along with the dizzying array of available board lengths, the widths of the surfboards can also vary greatly. The holder, and all hardware are to be made out of aluminum and stainless steel components for both strength and attractiveness. In truth, there is not too much to it, and for good reason. We felt that there were enough board holders out there that are big bulky and not very appealing to the eye. So we went with a minimalist approach that utilizes aluminum and stainless steel for a modern yet barely discernable look. Strength and durability Since our design is composed of entirely durable materials our only problems may stem with the hardware that mounts the unit to the wall. When it came to discuss
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Image of page 2
This is the end of the preview. Sign up to access the rest of the document.

This note was uploaded on 04/16/2008 for the course TECH 1432 taught by Professor Hernandez during the Spring '06 term at Texas State.

Page1 / 3

Ellis industrial design group project - Physical...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online