9.2.1.11 Packet Tracer - Configuring Named Standard ACLs Instructions - Packet Tracer Configuring Named Standard ACLs Topology Addressing Table Device

9.2.1.11 Packet Tracer - Configuring Named Standard ACLs Instructions

This preview shows page 1 - 2 out of 2 pages.

© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 1 of 2 Packet Tracer - Configuring Named Standard ACLs Topology Addressing Table Device Interface IP Address Subnet Mask Default Gateway R1 F0/0 192.168.10.1 255.255.255.0 N/A F0/1 192.168.20.1 255.255.255.0 N/A E0/0/0 192.168.100.1 255.255.255.0 N/A E0/1/0 192.168.200.1 255.255.255.0 N/A File Server NIC 192.168.200.100 255.255.255.0 192.168.200.1 Web Server NIC 192.168.100.100 255.255.255.0 192.168.100.1 PC0 NIC 192.168.20.3 255.255.255.0 192.168.20.1 PC1 NIC 192.168.20.4 255.255.255.0 192.168.20.1 PC2 NIC 192.168.10.3 255.255.255.0 192.168.10.1 Objectives Part 1: Configure and Apply a Named Standard ACL Part 2: Verify the ACL Implementation Background / Scenario The senior network administrator has tasked you to create a standard named ACL to prevent access to a file server. All clients from one network and one specific workstation from a different network should be denied access.
Image of page 1
Packet Tracer - Configuring Named Standard ACLs © 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 2 of
Image of page 2

You've reached the end of your free preview.

Want to read both pages?

  • Winter '14
  • TerryAndres
  • Computer Science, IP address, Web server, Subnetwork, Named Standard ACL, Named Standard ACLs

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture