hw9 - HW9 Problem 1: See the enclosed circuit. Problem 2:...

Info iconThis preview shows pages 1–2. Sign up to view the full content.

View Full Document Right Arrow Icon
HW9 Problem 1: See the enclosed circuit. Problem 2: In this hardware homework design of a RS Latch, transistors are used as switches to store a single bit of memory. The circuit has two inputs and two outputs. The outputs always complement each other. The latch uses its two inputs, Reset and Set, along with 4 transistors to determine which of the outputs will be a high voltage and which will be a low voltage. The transistors are arranged in such as way that when one of the two main transistors is high, the collector of that high transistor opens a switch that will connect the base of the other main transistor to ground, explaining how only one output can be true at a time. The reset input, when connected to high voltage, sets the circuit’s outputs, Q and Q’, to their default values. The set input does the opposite, switching the high and low voltages between the two outputs. The circuit remembers the outputs because the transistors cannot change their switching status unless acted on by another outside source,
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Image of page 2
This is the end of the preview. Sign up to access the rest of the document.

This homework help was uploaded on 04/19/2008 for the course ECE 1002 taught by Professor Moorhead during the Fall '07 term at Mississippi State.

Page1 / 2

hw9 - HW9 Problem 1: See the enclosed circuit. Problem 2:...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online