Unformatted text preview: over the sink. Pour the water from the beaker into the sink but the metal is not to go in the sinks. 7. Pour the wet metal onto a cloth or papertowel and thoroughly dry the metal. Return dry metals to the used metal container bearing the same unknown number as your uknown. 8. Return the styrofoam cups to the TA pan, not in the trash. 9. Be careful not to poke holes in the bottom of the cups. The probe tip should not touch the bottom of the styrofoam cup but about 1/4 to 1/2 inches from the bottom of the cup, completely submerged in the water....
View Full Document
This note was uploaded on 04/27/2008 for the course CHEM 1311L taught by Professor Robinson during the Fall '07 term at UGA.
- Fall '07