Lab3_Report - Report 3: Bipolar Junction Transistor...

Info iconThis preview shows pages 1–3. Sign up to view the full content.

View Full Document Right Arrow Icon

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: Report 3: Bipolar Junction Transistor Characterization Name: Lab Section: For this lab, please record the values of current and voltage in the designated boxes. 3.1 Use this table to record and summarize relevant results as you proceed through the lab experiment: for each region of operation, fill in the appropriate entries in Table 1 and compute the resulting and values. Parameters Forward Active Saturation Cutoff Reverse Active V BE V BC I B I C N/A N/A N/A N/A Table 1: Regions of operations and measurements 3.1.2 Measure V BE and V BC . What is the region of operation? V BE = V BC = 3.1.3 Measure I B and compute . I B = = 3.1.4 Calculate and use the result to calculate I E . What is the measured value of I E . Do the two values for I E agree? 1 2 = (Calculated) I E = (Measured) I E = 3.1.5 Does your calculated value agree with the value listed in the datasheet? If not, explain why there is a discrepancy....
View Full Document

This note was uploaded on 04/06/2009 for the course ECSE 2050 taught by Professor Monahella during the Spring '08 term at Rensselaer Polytechnic Institute.

Page1 / 4

Lab3_Report - Report 3: Bipolar Junction Transistor...

This preview shows document pages 1 - 3. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online