Lab9_Report - Report 9: MOS Characterization and...

Info iconThis preview shows pages 1–2. Sign up to view the full content.

View Full Document Right Arrow Icon

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: Report 9: MOS Characterization and Amplifiers Name: Lab Section: 3.1.2 Print out the I-V plot. 3.1.3 Label the operating regions on your printout and attach it to this report. Approximately what criterion determines the boundary between saturation and triode? 3.1.4 Properties (for VDS = 1.5 V) gm = ro = Region of Operation: 3.1.5 Properties (for VDS = 0.06 V) gm = ro = Region of Operation: 3.2.1 Channel Length Modulation Factor λ= 3.2.3 Print and attach the plot of (ID ) 2 vs. VG . 3.2.4 Find Kn . Kn = 1 3.2.5 Find VT H . VT = 1 2 3.3.2 Identify the two amplifier configurations. 3.3.3 Find the value of VIN that yields the maximum voltage gain. Find the gain and output voltage swing at this bias point. What problems might we encounter if we biased the circuit exactly at the point for maximum gain? VIN = Av = Output Voltage Swing: 3.3.4 What problems might we run into if the resistor has too much or too little resistance? ...
View Full Document

This note was uploaded on 04/06/2009 for the course ECSE 2050 taught by Professor Monahella during the Spring '08 term at Rensselaer Polytechnic Institute.

Page1 / 2

Lab9_Report - Report 9: MOS Characterization and...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online