CMIT 202 PC Build and Manual (Part 2) - 1 PC Build and...

This preview shows page 1 - 3 out of 6 pages.

1PC Build and Manual(Part 2)Part 6: Installing Hard Drive (SATA Hard Drives)There are two SATA hard drives which will be installed in the computer’s 3.5ʺdrive bay. In orderto install the hard drives follow the steps below:Slide the SATA hard drive to the 3.5ʺdrive bay inside the computer case.Use screws to attach the SATA hard drive to the holes in the drive bay.Use a SATA cable and connect one end of a SATA cable to the hard drive connector.Connect the other side of the SATA cable to the SATA connector on the motherboard (In the motherboard manual, this connector has been identify using number 9)Connect the 15 pin SATA power connector from the power supply to the SATA hard drive.Repeat the abow steps to install the second SATA drive.Step 7: Installing Optical Drive (CD-DVD Drive, Internal, SATA)
2The SATA CD-DVD drive will be installed in the computer’s 5.25 ʺdrive bay. Following steps describes how to install the SATA CD-DVD drive.

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture