Automatic Transaxle System - AX1 AUTOMATIC TRANSAXLE AUTOMATIC TRANSAXLE SYSTEM AUTOMATIC TRANSAXLE SYSTEM AX01L01 PRECAUTION If the vehicle is equipped

Automatic Transaxle System - AX1 AUTOMATIC TRANSAXLE...

This preview shows page 1 - 6 out of 28 pages.

AX01L–01AUTOMATIC TRANSAXLEAUTOMATIC TRANSAXLE SYSTEMAX–11021AuthorĂ:DateĂ:1997 LEXUS ES300 (RM511U)AUTOMATIC TRANSAXLE SYSTEMPRECAUTIONIf the vehicle is equipped with a mobile communication system, refer to the precautions in the IN sec-tion.
Background image
AX0WG–01V08426D09109Planetary Gear UnitO/D DirectClutch (C0)O/D Brake (B0)1st and ReverseBrake (B3)One–Way ClutchNo.2 (F2)2nd Brake (B2)ForwardClutch (C1)2nd CoastBrake (B1)Direct Clutch (C2)Input ShaftFront Planetary GearOne–Way ClutchNo.1 (F1)Rear PlanetaryGearIntermediateShaftCounterDrive GearO/D PlanetaryGearO/D One–Way ClutchNo.2 (F0)D01018D09110Shift LeverPositionGear PositionC0C1C2PRND2LzParkingReverseNeutral1st2nd3rdO/D1st2nd*3rd1st*2ndzzzzzzzzzzzzzzzzzzzzzzzB0B1B3F0F1B2F2zzzzzzzzzzzzzzzzzzzzzzzzz*Down–shift only–no up–shiftz: OperatingAX–2AUTOMATIC TRANSAXLEAUTOMATIC TRANSAXLE SYSTEM1022AuthorĂ:DateĂ:1997 LEXUS ES300 (RM511U)OPERATION
Background image
Q05725AX01N–02Q04678Driven GearVehicle Speed SensorO–RingClipAUTOMATIC TRANSAXLEVEHICLE SPEED SENSORAX–31023AuthorĂ:DateĂ:1997 LEXUS ES300 (RM511U)VEHICLE SPEED SENSORON–VEHICLE REPAIR1.REMOVE AIR CLEANER ASSEMBLY2.DISCONNECT VEHICLE SPEED SENSOR CONNEC-TOR3.REMOVE VEHICLE SPEED SENSOR ASSEMBLY(a)Remove the bolt and vehicle speed sensor assembly.(b)Remove the clip and driven gear from the vehicle speedsensor.(c)Remove the O–ring from the vehicle speed sensor.4.INSTALL VEHICLE SPEED SENSOR ASSEMBLY(a)Coat a new O–ring with ATF and install it to the vehiclespeed sensor.(b)Install the driven gear to the vehicle speed sensor andclip.(c)Install the vehicle speed sensor assembly with the bolt.Torque: 16 N·m (160 kgf·cm, 12 ft·lbf)5.CONNECT VEHICLE SPEED SENSOR CONNECTOR6.INSTALL AIR CLEANER ASSEMBLY
Background image
Q05726AX01O–02Q04733O–RingAX–4AUTOMATIC TRANSAXLEDIRECT CLUTCH SPEED SENSOR1024AuthorĂ:DateĂ:1997 LEXUS ES300 (RM511U)DIRECT CLUTCH SPEED SENSORON–VEHICLE REPAIR1.DISCONNECT DIRECT CLUTCH SPEED SENSORCONNECTOR2.REMOVE DIRECT CLUTCH SPEED SENSOR(a)Remove the bolt and direct clutch speed sensor.(b)Remove the O–ring from direct clutch speed sensor.3.INSTALL DIRECT CLUTCH SPEED SENSOR(a)Coat a new O–ring with ATF and install it to the directclutch speed sensor.(b)Install the direct clutch speed sensor with the bolt.Torque: 5.4 N·m (55 kgf·cm, 48 in.·lbf)
Background image
Q00229AX01P–02Q06496Q05727Q04617Z10304NeutralBasicLineGrooveAUTOMATIC TRANSAXLEPARK/NEUTRAL POSITION (PNP) SWITCHAX–51025AuthorĂ:DateĂ:1997 LEXUS ES300 (RM511U)PARK/NEUTRAL POSITION (PNP)SWITCHON–VEHICLE REPAIR1.DISCONNECT PARK/NEUTRAL POSITION SWITCHCONNECTOR2.REMOVE PARK/NEUTRAL POSITION SWITCH(a)Remove the clip from the shift control cable.
Background image
Image of page 6

You've reached the end of your free preview.

Want to read all 28 pages?

  • Spring '14
  • Lexus, Automatic transmission, AUTOMATIC TRANSAXLE

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture