Flip-Flops - Flip-Flops Lab 6 Objective The objective of...

Info iconThis preview shows pages 1–3. Sign up to view the full content.

View Full Document Right Arrow Icon
Flip-Flops Lab 6 Objective The objective of this experiment is to construct, test, and investigate the operation of various latches and flip-flops. Procedure SR Latch We constructed an SR latch using a 7400 IC as seen below in Diagram 6.1. The function table for the circuit was obtained (Table 6.1) Diagram 6.1 Table 6.1 S R Q Q` 1 0 0 1 1 1 0 1 (after S=1, R=0) 0 1 1 0 1 1 1 0 (After S=1, R=1) 0 0 1 1 Forbidden Page 1 of 5
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
D Latch Next a D Latch with four NAND Gates was constructed using only a 7400 IC as seen in Diagram 6.2. We then verified the function table (Table 6.2) Diagram 6.2 Table 6.2 En D Next State of Q 0 X No Change 1 0 Q=0, rest state 1 1 Q=1, set state Master-Slave Flip-Flop For this part of the lab we constructed a master-slave D flip-flop using a 7474 IC and a 7404 IC. The construction diagram is below (Diagram 6.3). We connected the D input to a switch and the clock input to a pulser. We connected the master latch to one indicator lamp and the output of the slave latch to another indicator lamp. We then
Background image of page 2
Image of page 3
This is the end of the preview. Sign up to access the rest of the document.

Page1 / 5

Flip-Flops - Flip-Flops Lab 6 Objective The objective of...

This preview shows document pages 1 - 3. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online