This preview has intentionally blurred sections. Sign up to view the full version.View Full Document
Unformatted text preview: c) For an input offset voltage of ±4mV, what is the output dc error with the input ac-coupled through a capacitor C as shown in the figure below (Consider only the effect of input offset voltage) 1 MΩ 1 MΩ 1 MΩ 1 KΩ Vin VSS-VSS Vout-+ d). If instead, the 1K-Ohm resistor is capacitively coupled to ground as shown, what is the output dc error? (Consider only the effect of input offset voltage ±4mV) 1 MΩ 1 MΩ 1 MΩ 1 KΩ Vin VSS-VSS-+ C e) Use the circuit in part (a). Assume the operational amplifier ideal except for f t = 100MHz, SR=1V/μS and V omax =10V If the frequency of the input signal is 10KHz, what is the maximum value of Vin before the output distorts?...
View Full Document
This note was uploaded on 07/05/2008 for the course ECSE 2050 taught by Professor Monahella during the Spring '08 term at Rensselaer Polytechnic Institute.
- Spring '08