Taguchi_orthogonal_arrays

Taguchi_orthogonal_arrays - Taguchi Orthogonal Arrays...

Info iconThis preview shows pages 1–2. Sign up to view the full content.

View Full Document Right Arrow Icon
Taguchi Orthogonal Arrays Author: John M. Cimbala, Penn State University Latest revision: 07 February, 2008 Introduction There are options for creating Taguchi arrays for the design of experiments, depending on how many times you choose to test each level of each parameter. For example, consider an experiment with 3 parameters and 3 levels of each parameter ( P = 3 and L = 3), as discussed in a previous learning module. We showed two Taguchi arrays for this case: o a 6-run array for testing each level of each parameter twice o a 9-run array for testing each level of each parameter three times The 9-run array is more desirable (if cost and time permit) because for each level of any one parameter, all three levels of the other parameters are tested . Of course, either array here costs less to run than a full- factorial analysis, since the number of required runs for a full factorial analysis is N = L P = 3 3 = 27. We refer to a full Taguchi array as an
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Image of page 2
This is the end of the preview. Sign up to access the rest of the document.

This note was uploaded on 07/23/2008 for the course ME 345 taught by Professor Staff during the Spring '08 term at Penn State.

Page1 / 3

Taguchi_orthogonal_arrays - Taguchi Orthogonal Arrays...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online