Chapter 5 - Network Cabling Answer all questions Reflect Using your own words reflect on what you have learned in chapter five. Use MSWord to write your summary with a minimum of 150 words. This chapter has described about “ Network Cabling ”. At any given point in the time can measure of a signal’s power. So, the amplitude is the height of the wave of the graph wave at any point among the time. For instance, time at 0.25 seconds, so the amplitude is 5 volts. At the 0.5 seconds, so the amplitude is 0 volts. At the 0.75 seconds, then the amplitude is 5 volts. In addition, a frequency is a number of times that an amplitude of the wave cycle or series from its starting point from the highest position to the lowest position, and back to the starting point into the fixed period of time. Frequency is expressed cycle in per hertz. Coaxial cable is the type of cable that has inside conductor and surrounded from the tube shielding layer. Moreover, fiber optic cable is that cable that is one or more used fiber optic wire to using carry lights. UTP Stand for unshielded twisted pair. UTP is more cheaper, and it is easiest to install. It is suffering from external electromagnetic interference. On the other hand, pair and STP stand for shielded twisted pair. It is more expensive and harder to handle. It provides better performance at higher data rates. It has metal braid or sheathing that reduces interference.
- Spring '16
- Networking, Twisted pair, Coaxial cable, Fiber-optic communication