ASE_1013_UG_Assignment_1

ASE_1013_UG_Assignment_1 - Root Chord (Fuselage Centerline)...

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
09/12/06 ASE 1013 Unigraphics Assignment 1 Due: ____________ 1. Sketch the Boeing 747-400 top-down view of the wing and horizontal stabilizer in Unigraphics, similar to the sketch done in class of the Gulfstream IV, using the appropriate geometric and dimensional constraints, as well as appropriate “active” or “reference” lines. Save the Unigraphics part file with the file name structure [UGS_Assignment01a_netid.prt]. 2. Fill out the specification table (below) with the appropriate data from the Boeing 747-400, in similar format to the Detail Specification table for the Gulfstream IV. Save the Word document with the file name structure [UGS_Assignment01b_netid.doc] WING Span (overall)
Background image of page 1
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: Root Chord (Fuselage Centerline) Root Chord Leading Edge Fuselage Station Break Chord Break Chord Wing Station Tip Chord (Theoretical) Tip Chord Wing Station Sweepback (25% chord line) Inboard Outboard TAIL Horizontal Tail Surface Span (overall) Root Chord (Theoretical) Root Chord Leading Edge Fuselage Station Tip Chord (Theoretical) Tip Chord Wing Station Sweepback (25% chord line) 3. E-mail both files as attachments to cog9@ae.msstate.edu by the due date mentioned in class. Include the e-mail subject line [ASE 1013 Unigraphics Assignment 1]. Be sure to follow appropriate e-mail procedures (as described by Dr. Koenig at the beginning of the semester) when submitting....
View Full Document

This note was uploaded on 09/21/2008 for the course ASE 1013 taught by Professor Koenig during the Fall '07 term at Mississippi State.

Ask a homework question - tutors are online