Lab8 Securing_the_AccessPoint - Lab8 Securing a Cisco...

This preview shows page 1 - 2 out of 3 pages.

Lab8: Securing a Cisco Aironet 1600 series Access Point ObjectiveConvert a wireless access point from lightweight to autonomous mode.Use a TFTP server to install a new image on a Cisco Aironet Access Point.Use the CLI to configure the Access Point. Disabling the Web-browser interface.Materials requiredWorld Wide Web accessA desktop computer with a serial port running Windows 7, TFTP server and Putty.One Cisco Aironet 1600 series access point using IOS-based firmware interface.One Console (rollover) cable.Step 1:Install a new image to convert an access point to autonomous mode.a)Login to your workstation using itlabs\Ciscofor the username with academyfor the password. b)Download the Autonomous AP images and recovery file from \\80dell\images\Wirelessand save it in the TFTP server’s root folder C:\Program Files\Tftpd64.c)Rename the file ap1g2-k9w7-tar.153-3.JC.tar -> ap1g2-k9w7-tar.defaultd)Copy the file AP_config.txtfrom the same folder and paste it to your desktop.

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture