lm137 - LM137/LM337 3-Terminal Adjustable Negative...

Info iconThis preview shows pages 1–3. Sign up to view the full content.

View Full Document Right Arrow Icon
LM137/LM337 3-Terminal Adjustable Negative Regulators General Description The LM137/LM337 are adjustable 3-terminal negative volt- age regulators capable of supplying in excess of -1.5A over an output voltage range of -1.2V to -37V. These regulators are exceptionally easy to apply, requiring only 2 external resistors to set the output voltage and 1 output capacitor for frequency compensation. The circuit design has been opti- mized for excellent regulation and low thermal transients. Further, the LM137 series features internal current limiting, thermal shutdown and safe-area compensation, making them virtually blowout-proof against overloads. The LM137/LM337 serve a wide variety of applications in- cluding local on-card regulation, programmable-output volt- age regulation or precision current regulation. The LM137/ LM337 are ideal complements to the LM117/LM317 adjustable positive regulators. Features n Output voltage adjustable from -1.2V to -37V n 1.5A output current guaranteed, -55˚C to +150˚C n Line regulation typically 0.01%/V n Load regulation typically 0.3% n Excellent thermal regulation, 0.002%/W n 77 dB ripple rejection n Excellent rejection of thermal transients n 50 ppm/˚C temperature coefficient n Temperature-independent current limit n Internal thermal overload protection n P + Product Enhancement tested n Standard 3-lead transistor package n Output is short circuit protected LM137 Series Packages and Power Capability Rated Design Device Package Power Load Dissipation Current LM137/337 TO-3 (K) 20W 1.5A TO-39 (H) 2W 0.5A LM337 TO-220 (T) 15W 1.5A LM337 SOT-223 (MP) 2W 1A Typical Applications Comparison between SOT-223 and D-Pak (TO-252) Packages Adjustable Negative Voltage Regulator DS009067-1 Full output current not available at high input-output voltages ² C1 = 1 μF solid tantalum or 10 μF aluminum electrolytic required for stability *C2 = 1 μF solid tantalum is required only if regulator is more than 4" from power-supply filter capacitor Output capacitors in the range of 1 μF to 1000 μF of aluminum or tantalum electrolytic are commonly used to provide improved output impedance and rejection of transients DS009067-31 Scale 1:1 May 1999 LM137/LM337 3-Terminal Adjustable Negative Regulators © 2001 National Semiconductor Corporation DS009067 www.national.com
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full Document Right Arrow Icon
Absolute Maximum Ratings (Notes 1, 4) If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Power Dissipation Internally Limited Input-Output Voltage Differential 40V Operating Junction Temperature Range LM137 -55˚C to +150˚C LM337 0˚C to +125˚C Storage Temperature -65˚C to +150˚C Lead Temperature (Soldering, 10 sec.) 300˚C Plastic Package (Soldering, 4 sec.) 260˚C ESD Rating 2k Volts Electrical Characteristics (Note 1) Parameter Conditions LM137 LM337 Units Min Typ Max Min Typ Max Line Regulation T j = 25˚C, 3V |V IN -V OUT | 40V 0.01 0.02 0.01 0.04 %/V (Note 2) I L =10mA Load Regulation T j
Background image of page 2
Image of page 3
This is the end of the preview. Sign up to access the rest of the document.

{[ snackBarMessage ]}

Page1 / 11

lm137 - LM137/LM337 3-Terminal Adjustable Negative...

This preview shows document pages 1 - 3. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online