2.3.2.5 Packet Tracer - Implementing Basic Connectivity.pdf

2.3.2.5 Packet Tracer - Implementing Basic Connectivity.pdf...

Info icon This preview shows pages 1–3. Sign up to view the full content.

View Full Document Right Arrow Icon
© 2015 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 1 of 4 Packet Tracer - Implementing Basic Connectivity Topology Addressing Table Device Interface IP Address Subnet Mask S1 VLAN 1 192.168.1.253 255.255.255.0 S2 VLAN 1 192.168.1.254 255.255.255.0 PC1 NIC 192.168.1.1 255.255.255.0 PC2 NIC 192.168.1.2 255.255.255.0 Objectives Part 1: Perform a Basic Configuration on S1 and S2 Part 2: Configure the PCs Part 3: Configure the Switch Management Interface Background In this activity, you will first perform basic switch configurations. Then, you will implement basic connectivity by configuring IP addressing on switches and PCs. When the IP addressing configuration is complete, you will use various show commands to verify configurations and use the ping command to verify basic connectivity between devices. Part 1: Perform a Basic Configuration on S1 and S2 Complete the following steps on S1 and S2. Step 1: Configure S1 with a hostname. a. Click S1 and then click the CLI tab. b. Enter the correct command to configure the hostname as S1 . Step 2: Configure the console and privileged EXEC mode passwords. a. Use cisco for the console password.
Image of page 1

Info icon This preview has intentionally blurred sections. Sign up to view the full version.

View Full Document Right Arrow Icon