Lab2903_6 - DIGITAL DESIGN I: EXPERIMENT #6 COMBINATIONAL...

Info iconThis preview shows pages 1–2. Sign up to view the full content.

View Full Document Right Arrow Icon
DIGITAL DESIGN I: EXPERIMENT #6 COMBINATIONAL LOGIC DESIGN USING VHDL AND DE2 IMPLEMENTATION Purpose The purpose of this experiment is to design combinational logic using VHDL, simulate your design using Mentor Graphics, and then implement and test your design in hardware on an FPGA. References 1) Digital Systems: Principles and Applications, Chapter 3 and 4 2) Mentor Graphics Tutorial 3) DE2 VHDL Programming Tutorial 4) DE2 Pin Assignments Materials Required Altera DE2 board, AC adapter, and USB interface cable Background FPGA implementation of digital logic was thoroughly discussed in Lab#1. In summary, the design flow for circuit implementation on the Altera DE2 FPGA board is as follows: 1. VHDL design and simulation using Mentor Graphics ModelSim (vsim) 2. VHDL compilation using Quartus II 3. FPGA pin assignment using Quartus II 4. Download design into FPGA using Quartus II 5. Test design on FPGA Prelab (to be checked by the TA at the BEGINNING of your lab class) [20 points] 1) Write one VHDL description with F1(w, x, y, z) =
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Image of page 2
This is the end of the preview. Sign up to access the rest of the document.

This note was uploaded on 11/20/2008 for the course ELEG 2903 taught by Professor Smith during the Fall '08 term at Arkansas.

Page1 / 2

Lab2903_6 - DIGITAL DESIGN I: EXPERIMENT #6 COMBINATIONAL...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online