CCNA LAB-1 - 255.255.255.0 CCNA(config-if)#no shutdown 4....

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
Cisco Certified Network Associate 640-802 Page 1 of 1 Day 1 – Basic router configuration, saving config, erasing config 1. Change the hostname of the  router Router>enable Router#config t Router(config)#hostname  CCNA CCNA(config)# 2. Configure Serial 0/0, assign IP  Address and enable interface CCNA(config)#int s0/0 CCNA(config-if)#ip  address 10.1.1.1  255.0.0.0 CCNA(config-if)#no  shutdown 3. Configure Fast Ethernet 0/0 CCNA(config-if)#int fa0/0 CCNA(config-if)#ip  address 192.168.1.1 
Background image of page 1
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: 255.255.255.0 CCNA(config-if)#no shutdown 4. Save running config to startup config CCNA(config-if)#exit CCNA(config)#exit CCNA#copy run start 5. Reload the router (reboot) CCNA#reload 6. View running and startup config CCNA>enable CCNA#show run CCNA#show start 7. Erase startup config CCNA#erase start 8. Reload the router (reboot) CCNA#reload 9. View running and startup config Router>enable Router#show run Router#show start...
View Full Document

This note was uploaded on 12/24/2008 for the course COE COE 344 taught by Professor Abuumara during the Spring '08 term at King Fahd University of Petroleum & Minerals.

Ask a homework question - tutors are online