6.5.1.2 Lab - Building a Switch and Router Network (1).doc

6.5.1.2 Lab - Building a Switch and Router Network (1).doc...

Info icon This preview shows pages 1–3. Sign up to view the full content.

View Full Document Right Arrow Icon
Lab - Building a Switch and Router Network Topology Addressing Table Device Interface IP Address Subnet Mask Default Gateway R1 G0/0 192.168.0.1 255.255.255.0 N/A G0/1 192.168.1.1 255.255.255.0 N/A PC-A NIC 192.168.1.3 255.255.255.0 192.168.1.1 PC-B NIC 192.168.0.3 255.255.255.0 192.168.0.1 Objectives Part 1: Set Up the Topology and Initialize Devices Part 2: Configure Devices and Verify Connectivity Part 3: Display Device Information Background / Scenario This is a comprehensive lab to review previously covered IOS commands. In this lab, you will cable the equipment as shown in the topology diagram. You will then configure the devices to match the addressing table. After the configurations have been saved, you will verify your configurations by testing for network connectivity. After the devices have been configured and network connectivity has been verified, you will use IOS commands to retrieve information from the devices to answer questions about your network equipment. This lab provides minimal assistance with the actual commands necessary to configure the router. Test your knowledge by trying to configure the devices without referring to the content or previous activities. Note : The routers used with CCNA hands-on labs are Cisco 1941 Integrated Services Routers (ISRs) with Cisco IOS Release 15.2(4)M3 (universalk9 image). The switches used are Cisco Catalyst 2960s with Cisco IOS Release 15.0(2) (lanbasek9 image). Other routers, switches, and Cisco IOS versions can be used. Depending on the model and Cisco IOS version, the commands available and output produced might vary from what is shown in the labs. Refer to the Router Interface Summary Table at the end of this lab for the correct interface identifiers. Note : Ensure that the routers and switches have been erased and have no startup configurations. Consult with your instructor for the procedure to initialize and reload a router and switch. Required Resources 1 Router (Cisco 1941 with Cisco IOS Release 15.2(4)M3 universal image or comparable) 1 Switch (Cisco 2960 with Cisco IOS Release 15.0(2) lanbasek9 image or comparable) © 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 1 of 7
Image of page 1

Info icon This preview has intentionally blurred sections. Sign up to view the full version.

View Full Document Right Arrow Icon
Lab - Building a Switch and Router Network 2 PCs (Windows 7 or 8 with terminal emulation program, such as Tera Term) Console cables to configure the Cisco IOS devices via the console ports Ethernet cables as shown in the topology Note : The Gigabit Ethernet interfaces on Cisco 1941 routers are autosensing and an Ethernet straight- through cable may be used between the router and PC-B. If using another model Cisco router, it may be necessary to use an Ethernet crossover cable. * 1 * ⩈⩈ 血䡅 䬀 H * ⩈⩈ 尀 帀 J 甀좗 ÿ 좗並餀 : 鬀囈좜 6 鴀雈 h h ( Part : ! ỿ Ψ ࠶࠶ Ψ 匀琀攀瀀 Ā ⩈∞ 㨀蠀 ĀЀ Ā Ā ⩈⩈ 킄 预 Ā ː 帆킄怂预濾 (.
Image of page 2
Image of page 3
This is the end of the preview. Sign up to access the rest of the document.

{[ snackBarMessage ]}

What students are saying

  • Left Quote Icon

    As a current student on this bumpy collegiate pathway, I stumbled upon Course Hero, where I can find study resources for nearly all my courses, get online help from tutors 24/7, and even share my old projects, papers, and lecture notes with other students.

    Student Picture

    Kiran Temple University Fox School of Business ‘17, Course Hero Intern

  • Left Quote Icon

    I cannot even describe how much Course Hero helped me this summer. It’s truly become something I can always rely on and help me. In the end, I was not only able to survive summer classes, but I was able to thrive thanks to Course Hero.

    Student Picture

    Dana University of Pennsylvania ‘17, Course Hero Intern

  • Left Quote Icon

    The ability to access any university’s resources through Course Hero proved invaluable in my case. I was behind on Tulane coursework and actually used UCLA’s materials to help me move forward and get everything together on time.

    Student Picture

    Jill Tulane University ‘16, Course Hero Intern