NETWORKS Lab16.doc - Lab 16 CCNA Routing and Switching...

This preview shows page 1 - 4 out of 14 pages.

Lab 16 CCNA: Routing and Switching Essentials CSIS 331 Week 5-8 Skills Assessment – Student Training Exam Complete the assessment in Packet Tracer and document and fill in the blanks. Submit this file and the pka file in Week 8 Lab 16. Points will not be given for incomplete Steps. Topology Assessment Objectives Part 1: Initialize Devices (5 points, 5 minutes) Part 2: Configure Device Basic Settings (7 points, 30 minutes) Part 3: Configure Switch Security, VLANs, and Inter-VLAN Routing (7 points, 15 minutes) © 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 1 of 14
CCNA: Routing and Switching Essentials SA Exam Part 4: Configure OSPFv2 Dynamic Routing Protocol (7 points, 25 minutes) Part 5: Implement DHCP and NAT (7 points, 25 minutes) Part 6: Configure and Verify Access Control Lists (ACLs) (7 points, 25 minutes) Scenario In this Skills Assessment (SA) you will configure a small network. You will configure routers, switches, and PCs to support IPv4 connectivity, switch security, and inter VLAN routing. You will then configure the devices with OSPFv2, DHCP, and dynamic and static NAT. Access control lists (ACLs) will be applied for added security. You will test and document the network using common CLI commands throughout the assessment. Required Packet Tracer Lab 3 Routers (Cisco 1941 with Cisco IOS Release 15.2(4)M3 universal image or comparable) 2 Switches (Cisco 2960 with Cisco IOS Release 15.0(2) lanbasek9 image or comparable) 3 PCs (Windows 7, Vista, or XP with terminal emulation program, such as Tera Term) Console cable to configure the Cisco IOS devices via the console ports Ethernet and Serial cables as shown in the topology Part 1: Initialize Devices Total points: 5 Time: 5 minutes Step 1: Initialize and reload the routers and switches. Erase the startup configurations reload the devices. Task IOS Command Points Erase the startup-config file on all routers. R1# erase startup-config 1 Reload all routers. R1# reload 1 Erase the startup-config file on all switches and remove the old VLAN database. S1# erase startup-config S1# del vlan.dat 1 Reload both switches. S1# reload 1 Verify VLAN database is absent from flash on both switches. S1# show flash 1 Points: __________ of 5 Part 2: Configure Device Basic Settings Total points: 7 Time: 30 minutes © 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 2 of 14
CCNA: Routing and Switching Essentials SA Exam Step 1: Configure the Internet PC. Configuration tasks for the Internet PC include the following (Refer to Topology for IP address information): Configuration Item or Task Specification Points IP Address 209.165.200.230 .5 Subnet Mask 255.255.255.248 Default Gateway 209.165.200.225 Step 2: Configure R1. Configuration tasks for R1 include the following: Configuration Item or Task Specification Points Disable DNS lookup 1 Router name R1 Encrypted privileged exec password Class Console access password Cisco Telnet access password Cisco Encrypt the clear text passwords MOTD banner Unauthorized Access is Prohibited!

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture