Lab – Configuring Switch Security Features
1 Router (Cisco 1941 with Cisco IOS Release 15.2(4)M3 universal image or comparable)
1 Switch (Cisco 2960 with Cisco IOS Release 15.0(2) lanbasek9 image or comparable)
1 PC (Windows 7, Vista, or XP with terminal emulation program, such as Tera Term)
1 Console cable to configure the Cisco IOS devices via the console ports
2 Ethernet cables as shown in the topology
Set Up the Topology and Initialize Devices
In Part 1, you will set up the network topology and clear any configurations if necessary.
Cable the network as shown in the topology.
Initialize and reload the router and switch.
If configuration files were previously saved on the router or switch, initialize and reload these devices back to
their default configurations.
Configure Basic Device Settings and Verify Connectivity
In Part 2, you will configure basic settings on the router, switch, and PC. Refer to the Topology and
Addressing Table at the beginning of this lab for device names and address information.