02-02ChapGere

# 02-02ChapGere - 80 CHAPTER 2 Axially Loaded Members Problem...

This preview shows pages 1–3. Sign up to view the full content.

Solution 2.3-8 Bar with a hole 80 CHAPTER 2 Axially Loaded Members d 2 d 1 L 4 P P L 4 L 2 d d 5 diameter of hole S HORTENING d OF THE BAR (Eq. 1) N UMERICAL VALUES ( DATA ): d 5 maximum allowable shortening of the bar 5 8.0 mm 5 PL p E ¢ 1 d 1 2 2 d 2 1 1 d 1 2 1 2 d 2 2 5 P E C L / 4 p 4 ( d 1 2 2 d 2 ) 1 L / 4 p 4 d 1 2 1 L / 2 p 4 d 2 2 S d 5 a N i L i E i A i 5 P E a L i A i P 5 110 kN L 5 1.2 m E 5 4.0 GPa d 1 5 100 mm d max 5 maximum allowable diameter of the hole d 2 5 60 mm S UBSTITUTE NUMERICAL VALUES INTO E Q . (1) FOR d AND SOLVE FOR d 5 d max : U NITS : Newtons and meters 3 d max 5 23.9 mm d 5 0.02387 m d 2 5 569.81 3 10 2 6 m 2 5 761.598 2 100 2 555.556 5 106.042 1 0.01 2 d 2 761.598 5 1 0.01 2 d 2 1 1 0.01 1 2 0.0036 B 1 (0.1) 2 2 d 2 1 1 (0.1) 2 1 2 (0.06) 2 R 0.008 5 (110,000)(1.2) p (4.0 3 10 9 ) Problem 2.3-9 A wood pile, driven into the earth, supports a load P entirely by friction along its sides (see figure). The friction force f per unit length of pile is assumed to be uniformly distributed over the surface of the pile. The pile has length L , cross-sectional area A , and modulus of elasticity E . (a) Derive a formula for the shortening d of the pile in terms of P , L , E , and A . (b) Draw a diagram showing how the compressive stress s c varies throughout the length of the pile. L P f Problem 2.3-8 A bar ABC of length L consists of two parts of equal lengths but different diameters (see figure). Segment AB has diameter d 1 5 100 mm and segment BC has diameter d 2 5 60 mm. Both segments have length L /2 5 0.6 m. A longitudinal hole of diameter d is drilled through segment AB for one-half of its length (distance L /4 5 0.3 m). The bar is made of plastic having modulus of elasticity E 5 4.0 GPa. Compressive loads P 5 110 kN act at the ends of the bar. If the shortening of the bar is limited to 8.0 mm, what is the maximum allowable diameter d max of the hole? d 2 d 1 L 4 P P AB C L 4 L 2

This preview has intentionally blurred sections. Sign up to view the full version.

View Full Document
Solution 2.3-9 Wood pile with friction SECTION 2.3 Changes in Lengths under Nonuniform Conditions 81 F ROM FREE - BODY DIAGRAM OF PILE : (Eq. 1) (a) S HORTENING d OF PILE : At distance y from the base: © F vert 5 0 Ê c 1 T 2 Ê fL 2 P 5 0 Ê f 5 P L N ( y ) 5 axial force N ( y ) 5 fy (Eq. 2) (b) C OMPRESSIVE STRESS s c IN PILE At the base ( y 5 0): s c 5 0 See the diagram above. At the top( y 5 L ): s c 5 P A s c 5 N ( y ) A 5 fy A 5 Py AL d 5 PL 2 EA d 5 # L 0 d d 5 f EA # L 0 ydy 5 fL 2 2 EA 5 PL 2 EA d d 5 N ( y ) dy EA 5 fy dy EA L y P f dy f = P L s c = Py AL P A 0 Compressive stress in pile Friction force per unit length of pile Problem 2.3-10 A prismatic bar AB of length L , cross-sectional area A , modulus of elasticity E , and weight W hangs vertically under its own weight (see figure). (a) Derive a formula for the downward displacement d C of point C , located at distance h from the lower end of the bar. (b) What is the elongation d B of the entire bar? (c) What is the ratio b of the elongation of the upper half of the bar to the elongation of the lower half of the bar?
This is the end of the preview. Sign up to access the rest of the document.

{[ snackBarMessage ]}

### Page1 / 26

02-02ChapGere - 80 CHAPTER 2 Axially Loaded Members Problem...

This preview shows document pages 1 - 3. Sign up to view the full document.

View Full Document
Ask a homework question - tutors are online