{[ promptMessage ]}

Bookmark it

{[ promptMessage ]}

Chap 06 Solns-6E

# Chap 06 Solns-6E - CHAPTER 6 MECHANICAL PROPERTIES OF...

This preview shows pages 1–5. Sign up to view the full content.

CHAPTER 6 MECHANICAL PROPERTIES OF METALS PROBLEM SOLUTIONS 6.1 This problem asks that we derive Equations (6.4a) and (6.4b), using mechanics of materials principles. In Figure (a) below is shown a block element of material of cross-sectional area A that is subjected to a tensile force P . Also represented is a plane that is oriented at an angle θ referenced to the plane perpendicular to the tensile axis; the area of this plane is A' = A /cos θ . In addition, the forces normal and parallel to this plane are labeled as P' and V' , respectively. Furthermore, on the left-hand side of this block element are shown force components that are tangential and perpendicular to the inclined plane. In Figure (b) are shown the orientations of the applied stress σ , the normal stress to this plane σ ' , as well as the shear stress τ ' taken parallel to this inclined plane. In addition, two coordinate axis systems in represented in Figure (c): the primed x and y axes are referenced to the inclined plane, whereas the unprimed x axis is taken parallel to the applied stress. Normal and shear stresses are defined by Equations (6.1) and (6.3), respectively. However, we now chose to express these stresses in terms (i.e., general terms) of normal and shear forces ( P and V ) as σ = P A τ = V A For static equilibrium in the x' direction the following condition must be met: 113

This preview has intentionally blurred sections. Sign up to view the full version.

View Full Document
F ξ220d = 0 which means that P' - Πχοσ θ = 0 Or that P' = P cos θ Now it is possible to write an expression for the stress σ ' in terms of P' and A' using the above expression and the relationship between A and A' [Figure (a)]: σ ' = P' A' = Pcos θ Α χοσθ = Π Α χοσ 2 θ However, it is the case that P / A = σ ; and, after make this substitution into the above expression, we have Equation (6.4a)--that is σ ' = s cos 2 q Now, for static equilibrium in the y' direction, it is necessary that F y ' = 0 = - ς220d + Π σινθ Or V' = Psin θ We now write an expression for τ ' as 114
τ ' = V' A' And, substitution of the above equation for V' and also the expression for A' gives τ ' = V' A' = Psin θ Α χοσθ = P A sin θχοσ θ = σσιν θχοσ θ which is just Equation (6.4b). 6.2 (a) Below are plotted curves of cos 2 θ (for σ ' ) and sin θ cos θ (for τ ' ) versus θ . (b) The maximum normal stress occurs at an inclination angle of 0 ° . 115

This preview has intentionally blurred sections. Sign up to view the full version.

View Full Document
(c) The maximum shear stress occurs at an inclination angle of 45 ° . 6.3 This problem calls for us to calculate the elastic strain that results for an aluminum specimen stressed in tension. The cross-sectional area is just (10 mm) x (12.7 mm) = 127 mm 2 (= 1.27 x 10 -4 m 2 = 0.20 in. 2 ); also, the elastic modulus for Al is given in Table 6.1 as 69 GPa (or 69 x 10 9 N/m 2 ).
This is the end of the preview. Sign up to access the rest of the document.

{[ snackBarMessage ]}

### Page1 / 59

Chap 06 Solns-6E - CHAPTER 6 MECHANICAL PROPERTIES OF...

This preview shows document pages 1 - 5. Sign up to view the full document.

View Full Document
Ask a homework question - tutors are online