R112r3e.doc -...

This preview shows 1 out of 6 pages.

E /ECE/324/Rev.2/Add.111/Rev.3− E /ECE/TRANS/505/Rev.2/Add.111/Rev.3 9 January 2013 Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Equipment and Parts which can be fitted and/or be used on Wheeled Vehicles and the Conditions for Reciprocal Recognition of Approvals Granted on the Basis of these Prescriptions * (Revision 2, including the amendments which entered into force on 16 October 1995) _________ Addendum 111: Regulation No. 112 Revision 3 Incorporating all valid text up to: 01 series of amendments to the Regulation – Date of entry into force: 9 December 2010 Corrigendum 1 to the 01 series of amendments to the Regulation – Date of entry into force: 9 March 2011 Supplement 1 to the 01 series of amendments to the Regulation – Date of entry into force: 28 October 2011 Supplement 2 to the 01 series of amendments to the Regulation – Date of entry into force: 26 July 2012 Supplement 3 to the 01 series of amendments to the Regulation – Date of entry into force: 18 November 2012 Uniform provisions concerning the approval of motor vehicle headlamps emitting an asymmetrical passing-beam or a driving-beam or both and equipped with filament lamps and/or light-emitting diode (LED) modules _________ * * Former title of the Agreement: Agreement concerning the adoption of uniform conditions of approval and reciprocal recognition of approval for motor vehicle equipment and parts, done at Geneva on 20 March 1958. GE.13-
Image of page 1

Subscribe to view the full document.

E/ECE/324/Rev.2/Add.111/Rev.2 E/ECE/TRANS/505/Rev.2/Add.111/Rev.2 UNITED NATIONS 2 GE.
Image of page 2
Image of page 3

Subscribe to view the full document.

E/ECE/324/Rev.2/Add.111/Rev.3 E/ECE/TRANS/505/Rev.2/Add.111/Rev.3 Regulation No. 112 Uniform provisions concerning the approval of motor vehicle headlamps emitting an asymmetrical passing-beam or a driving-beam or both and equipped with filament lamps and/or light-emitting diode (LED) modules Contents Page A. Administrative provisions Scope .................................................................................................................................... 5 1. Definitions ............................................................................................................................. 5 2. Application for approval of a headlamp ................................................................................ 6 3. Markings ................................................................................................................................ 7 4. Approval ................................................................................................................................ 8 B. Technical requirements for headlamps 5. General specifications ........................................................................................................... 11 6. Illumination ........................................................................................................................... 14 7. Colour .................................................................................................................................... 21 8. Gauging of discomfort ........................................................................................................... 21 C. Further administrative provisions 9. Modification of the headlamp type and extension of approval ............................................. 22 10. Conformity of production ...................................................................................................... 22 11. Penalties for non-conformity of production .......................................................................... 23 12. Production definitively discontinued ..................................................................................... 23 13. Names and addresses of Technical Services responsible for conducting approval tests and of Type Approval Authorities .................................................................. 23 14. Transitional provisions .......................................................................................................... 23 Annexes 1 Communication ...................................................................................................................... 25 2 Examples of arrangement of approval marks ......................................................................... 27 3 Spherical coordinate measuring system and test point locations ........................................... 33 4 Tests for stability of photometric performance of headlamps in operation ............................ 35 Appendix 1 - Overview of operational periods concerning test for stability of photometric performance ............................................................................... 41 5 Minimum requirements for conformity of production control procedures ............................ 42 4
Image of page 4
E/ECE/324/Rev.2/Add.111/Rev.3 E/ECE/TRANS/505/Rev.2/Add.111/Rev.3 6 Requirements for lamps incorporating lenses of plastic material - Testing of lens or material samples and of complete lamps ................................................................................ 45 Appendix 1 - Chronological order of approval tests ..............................................................
Image of page 5

Subscribe to view the full document.

Image of page 6
You've reached the end of this preview.
  • Spring '12
  • Islam
  • japan, ........., Incandescent light bulb, type approval, Right- and left-hand traffic

{[ snackBarMessage ]}

What students are saying

  • Left Quote Icon

    As a current student on this bumpy collegiate pathway, I stumbled upon Course Hero, where I can find study resources for nearly all my courses, get online help from tutors 24/7, and even share my old projects, papers, and lecture notes with other students.

    Student Picture

    Kiran Temple University Fox School of Business ‘17, Course Hero Intern

  • Left Quote Icon

    I cannot even describe how much Course Hero helped me this summer. It’s truly become something I can always rely on and help me. In the end, I was not only able to survive summer classes, but I was able to thrive thanks to Course Hero.

    Student Picture

    Dana University of Pennsylvania ‘17, Course Hero Intern

  • Left Quote Icon

    The ability to access any university’s resources through Course Hero proved invaluable in my case. I was behind on Tulane coursework and actually used UCLA’s materials to help me move forward and get everything together on time.

    Student Picture

    Jill Tulane University ‘16, Course Hero Intern