{[ promptMessage ]}

Bookmark it

{[ promptMessage ]}

ch01_ism - Circuit Variables 1 Assessment Problems AP 1.1...

Info iconThis preview shows pages 1–4. Sign up to view the full content.

View Full Document Right Arrow Icon
1 Circuit Variables Assessment Problems AP 1.1 To solve this problem we use a product of ratios to change units from dollars/year to dollars/millisecond. We begin by expressing $10 billion in scientific notation: $ 100 billion = $ 100 × 10 9 Now we determine the number of milliseconds in one year, again using a product of ratios: 1 year 365 . 25 days · 1 day 24 hours · 1 hour 60 mins · 1 min 60 secs · 1 sec 1000 ms = 1 year 31 . 5576 × 10 9 ms Now we can convert from dollars/year to dollars/millisecond, again with a product of ratios: $ 100 × 10 9 1 year · 1 year 31 . 5576 × 10 9 ms = 100 31 . 5576 = $ 3 . 17 / ms AP 1.2 First, we recognize that 1 ns = 10 9 s. The question then asks how far a signal will travel in 10 9 s if it is traveling at 80% of the speed of light. Remember that the speed of light c = 3 × 10 8 m/s. Therefore, 80% of c is (0 . 8)(3 × 10 8 ) = 2 . 4 × 10 8 m/s. Now, we use a product of ratios to convert from meters/second to inches/nanosecond: 2 . 4 × 10 8 m 1 s · 1 s 10 9 ns · 100 cm 1 m · 1 in 2 . 54 cm = (2 . 4 × 10 8 )(100) (10 9 )(2 . 54) = 9 . 45 in 1 ns Thus, a signal traveling at 80% of the speed of light will travel 9 . 45 in a nanosecond. 1–1
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full Document Right Arrow Icon
1–2 CHAPTER 1. Circuit Variables AP 1.3 Remember from Eq. (1.2), current is the time rate of change of charge, or i = dq dt In this problem, we are given the current and asked to find the total charge. To do this, we must integrate Eq. (1.2) to find an expression for charge in terms of current: q ( t ) = t 0 i ( x ) dx We are given the expression for current, i , which can be substituted into the above expression. To find the total charge, we let t → ∞ in the integral. Thus we have q total = 0 20 e 5000 x dx = 20 5000 e 5000 x 0 = 20 5000 ( e e 0 ) = 20 5000 (0 1) = 20 5000 = 0 . 004 C = 4000 µ C AP 1.4 Recall from Eq. (1.2) that current is the time rate of change of charge, or i = dq dt . In this problem we are given an expression for the charge, and asked to find the maximum current. First we will find an expression for the current using Eq. (1.2): i = dq dt = d dt 1 α 2 t α + 1 α 2 e αt = d dt 1 α 2 d dt t α e αt d dt 1 α 2 e αt = 0 1 α e αt α t α e αt α 1 α 2 e αt = 1 α + t + 1 α e αt = te αt Now that we have an expression for the current, we can find the maximum value of the current by setting the first derivative of the current to zero and solving for t : di dt = d dt ( te αt ) = e αt + t ( α ) e αt = (1 αt ) e αt = 0 Since e αt never equals 0 for a finite value of t , the expression equals 0 only when (1 αt ) = 0 . Thus, t = 1 will cause the current to be maximum. For this value of t , the current is i = 1 α e α/α = 1 α e 1 Remember in the problem statement, α = 0 . 03679 . Using this value for α , i = 1 0 . 03679 e 1 = 10 A
Background image of page 2
Problems 1–3 AP 1.5 Start by drawing a picture of the circuit described in the problem statement: Also sketch the four figures from Fig. 1.6: [a] Now we have to match the voltage and current shown in the first figure with the polarities shown in Fig. 1.6. Remember that 4A of current entering Terminal 2 is the same as 4A of current leaving Terminal 1. We get (a) v = 20 V , i = 4 A; (b) v = 20 V,
Background image of page 3

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full Document Right Arrow Icon
Image of page 4
This is the end of the preview. Sign up to access the rest of the document.

{[ snackBarMessage ]}