Bobby Pin Lock PickForming our bobby pin lock pick is a very short and simple task.The first thing we have to do is remove the rounded tip from the straight side of the bobby pin. This can be accomplished easily by using fingernails, pliers, or even your teeth.Once the rubber end is off we can begin making our bends. Start by pulling the bobby pin apart and roughly straightening it as such.Next, stick the straight end of the bobby pin about one centimeter, or about 1/3 of an inch, into the keyhole of your lock and applyenough pressure to bend the end of the pin into a hook. The result should look something similar to this.Now that we have our completed lock pick, let’s move on to forging our tension wrench.Bobby Pin Tension WrenchThe tension wrench has the very uncomplicated shape of an “L” and this makes forming it as simple as a single bend. Start by placing the closed end of the bobby pin about an inch into your lock’s keyhole and firmly apply pressure downward until you bend the pin 90 degrees. That’s all there is to it.We now have a usable set of lock picking tools, but before we can attempt to pick any locks it is important to first understand how exactly a pin and tumbler locking mechanism works.Now that we have our picks and tension wrench we can get down and dirty!One step: 1Pull apart the first bobby pin so that it is a long, flat metal piece.Bend back the pin so that you have a long piece of metal wire. This will be your pick, and is inserted into the lockand used to move the pins out of the way.●Strip off the rubber knobs on the ends, as they will only get in the way. You can do this with your teeth, or a pair of wire cutters if you have them.