AbstractThis assignment is to use the CodeWarrior software to build a program to Flash the LEDs in OneHz Frequency using Timers. We will have to use the C Program in the CodeWarrior to develop the program and then we will send the code to the Dragon 12 board to display the code on the board by lighting up the appropriate LEDs. IntroductionThis assignment is to become familiar with using Buzzers on Dragon 12-Light board, the timer output compare function, and interrupt method, as well as to improve your programming skills. Method and Procedures1.Run this example program, Buzzer.txt to see how the Buzzer on a controller board is turned on and off. Please note that, in the example program, the Buzzer is turned on and off in approximately one millisecond frequency.