Disclaimer of LiabilityThis document has been subjected to rigorous technical review before being published. It is revised at regular intervals, and any modifications and amendments are included in the subsequent issues. The content of this document has been compiled for information purposes only. Although Siemens AG has made best efforts to keep the document as precise and up-to-date as possible, Siemens AG shall not assume any liability for defects and damage which result through use of the information contained herein.This content does not form part of a contract or of business relations; nor does it change these. All obligations of Siemens AG are stated in the relevant contractual agreements.Siemens AG reserves the right to revise this document from time to time. Document Release: E50417-H1176-C070-B1.03Edition: 06.2017Product version: V4.59CopyrightCopyrightSiemens AG 2017. All rights reserved. The disclosure, duplication, distribution and editing of this document, or utilization and communication of the content are not permitted, unless authorized in writing. All rights, including rights created by patent grant or registration of a utility model or a design, are reserved.Registered TrademarksSIMATIC®, SIMATIC NET®, SIPROTEC®, DIGSI®, SICAM®, SIMEAS®and SINAUT®are registered trademarks of SIEMENS AG. An unauthorized use is illegal. All other designations in this document can be trademarks whose use by third parties for their own purposes can infringe the rights of the owner.