BME 552 HW4 2009

BME 552 HW4 2009 - BME 552 Homework Set 4 Assigned Due 1...

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: BME 552 Homework Set 4 Assigned Feb 20, 2009 Due Feb 27, 2009 1. Neural system you are interested in stimulating has chronaxie of 0.6 ms and rheobase of 40 uA. You are working on an implantable device that will have limited voltage. The limit on the voltage for the proposed device is +/‐5V for stimulation (i.e. the circuit has +/‐ 6V to operate), but in order to obtain the data you use a stimulator with +/‐ 100V. Your electrode diameter is 100 microns. Assume tissue resistivity of 100 Ohm‐cm, capacitance of 20 uF/cm, and Rp of 10 MOhm. At what pulse width do you achieve the lowest voltage? Is this voltage within the limits of the stimulator? 2. You have a constant voltage stimulator in a DBS system. Initially, resistance seen by the output is 5KOhm (assume it can be modeled as a single resistor for this problem). Over time, this resistance increases to 15KOhm. Your initial settings for stimulation are 3V, 0.1 ms. Your stimulator has a 5V output limit. How do you need to adjust your output to have equivalent charge output at the higher resistance? Why may you need to increase the charge with the higher resistance? 3. Dr. Wills Problem, see following pages. ...
View Full Document

Ask a homework question - tutors are online