Module-On-TLE11-Welding-Part-3-of-4.docx - TLE11 LEARNING...

This preview shows page 1 - 5 out of 18 pages.

TLE11 - LEARNING MODULESector: METALS AND ENGINEERINGSubject Code: TLE - 11 Subject Description: Welding Module Title: Welding Carbon Steel Plates and Pipe Using SMAW DAVAO CENTRAL COLLEGE INCORPORATEDJuan dela Cruz St.Toril, Davao City (Tel.No. 291-1882)LEARNING OUTCOME #3 WELD SUBSEQUENTLY/FILLING PASSES
CONTENTS:1.Welding Procedure and Specification2.Parameters to produce quality weld3.Welding subsequently/filling passesASSESSMENT CRITERIA:1. Subsequent/ filling passes is performed in accordance with approvedWPS2. Weld is visually checked for defects and repaired, as required.3. Weld is visually acceptable in accordance with applicable codes and standards.CONDITIONS:The student must be provided with the following:4.Equipment: welding machine, portable grinder 5.Tools: chipping hammer, half-round file, steel brush6.Materials: carbon steel plate, grinding stone/disc , electrodesASSESSMENT METHODS:Written TestOral Questioning/InterviewDemonstration/Role PlayQA SYSTEMWELDINGWelding CarbonSteel Plates andPipe Using SMAWDate Developed:January 2016Document No. DCCI-TLE11-0001Issued by:DCCIPage 1 of 18Developed by:TEODORO E. ESPERARevision # 01
Learning ExperiencesLearning Outcome 3WELDING SUBSEQUENTLY/FILLING PASSESLearning ActivitiesSpecial InstructionsRead Information Sheet 2.3-1 on “Welding Procedure and Specification”This Learning Outcome deals with thedevelopmentoftheInstitutionalCompetency Evaluation Tool whichtrainers use in evaluating their traineesafter finishing a competency of thequalification.Go through the learning activitiesoutlined for you on the left column togain the necessary information orknowledge before doing the tasks topractice on performing the requirementsof the evaluation tool.The output of this LO is a completeInstitutionalCompetencyEvaluationPackage for one Competency ofWelding. Your output shall serve as oneof your portfolio for your InstitutionalCompetency Evaluation forWeldingCarbon Steel Plates and Pipes UsingSMAW.Feel free to show your outputs to yourtrainer as you accomplish them forguidance and evaluation.Answer Self-check 2.3-1Read Information Sheet 2.3-2: “Parameter s to produce qualityweld”Answer Self-check 2.3-2Perform Job Sheet 2.3-3 on “Welding subsequently/filling passes”After doing all the activities for this LO, you are ready to proceed to the next LO: Performing CappingQA SYSTEMWELDINGWelding CarbonSteel Plates andPipe Using SMAWDate Developed:January 2016Document No. DCCI-TLE11-0001Issued by:DCCIPage 2 of 18Developed by:TEODORO E. ESPERARevision # 01
Information Sheet 2.3-1WELDING PROCEDURE AND SPECIFICATIONLearning Objectives:After reading this information sheet, you MUST be able to:1.) Identify welding procedure specification; and2.) Interpret welding procedures specification.

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture