Unformatted text preview: Simulation 1 20. Save your work and close the T4A Workbench Project. 4-4 TUTORIAL 4B — PLATE WITH CENTRAL SQUARE HOLE Suppose we take the plate of Tutorial 4A and replace the circular hole with a 200 mm
square hole. The upper right quadrant of the model is shown below. 1. Open a new Workbench Project; create the model shown below and save as
T4B. Figure 4-21 Plate with square hole. With T4B highlighted on the project page, select New simulation. \ﬁ Mesh > Preview Mesh The next ﬁgure shows the default mesh for this problem. Figure 4-22 Default mesh for the plate with square hole. The default mesh consists of 136 brick elements as shown above. ...
View Full Document
- Fall '08