palprogramming - Massachusetts Institute of Technology...

Info iconThis preview shows pages 1–2. Sign up to view the full content.

View Full Document Right Arrow Icon
Massachusetts Institute of Technology Department of Electrical Engineering and Computer Science 6.111 - Introductory Digital Systems Laboratory PAL Programming Last revised May 1, 2002 Introduction We will not deal here with the details of the VHDL coding used to generate the logic embedded in the PAL, but assume that you have properly coded what you want the PAL to do. Compile the code using GALAXY which is accessed on the Project Athena system by: setup 6.111 galaxy & It is necessary to open a project (either `open' or `new' and select the vhdl files you will be incorporating into your design. Use ``smart'' compile. When your file compiles with no errors, select the appropriate part (`device'), set the appropriate top file and then compile again. You should have two files that are pertinent here: one is the `.rpt' file which will disclose pin numbers on your PAL. The other is the `.jed' of JEDEC file which you will use to program your PAL. Using mcopy -t , copy that jedec file to a floppy disk. If the command, mcopy is not found,
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Image of page 2
This is the end of the preview. Sign up to access the rest of the document.

This note was uploaded on 07/20/2009 for the course ELECTRICAL 6.111 taught by Professor Prof.dontroxel during the Fall '02 term at MIT.

Page1 / 2

palprogramming - Massachusetts Institute of Technology...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online