Lab#12.docx - Lab Manual Course Title Machine Design Cad-II Experiment 12 Title To develop G codes in Computer aided manufacturing NC Assembly in

Lab#12.docx - Lab Manual Course Title Machine Design Cad-II...

This preview shows page 1 - 6 out of 6 pages.

Lab Manual Course Title: Machine Design Cad-II Experiment # 12 Title: To develop G codes in Computer aided manufacturing NC Assembly in roughing & drilling. . Equipment: CREO Software 6.0. Procedure: 1) Make a new part file and named this file as “roughing and drilling”. 2) Change the units of your drawing to” mmns_part_solid” 1 Lab Title: Modelling and Simulation Lab
Image of page 1
Lab Manual Course Title: Machine Design Cad-II 3) Select the front plane and make a rectangle on by using command “center rectangle” of the dimensions of 100mm. 4) Now use the extrude command to the required length. 5) Select the circle “center & point” and draw four circles with “10mm diameter” and then select OK. 2 Lab Title: Modelling and Simulation Lab
Image of page 2
Lab Manual Course Title: Machine Design Cad-II 6) Select the workpiece then go to the automatic workpiece option then apply the automatic workpiece option. 7) Click the icon named “Coordinate system”. Set the distance first “50mm” & second
Image of page 3
Image of page 4
Image of page 5
Image of page 6

You've reached the end of your free preview.

Want to read all 6 pages?

  • Winter '20
  • CARPES
  • #, Computer-aided design, 10mm, 50mm

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture

  • Left Quote Icon

    Student Picture