Each channel has two possible positions for the thin

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: hannel 4 has two sockets in line. Channel 4 Resolver Synchro Ch. 4 Channels 1, 2, and 3 Synchro Resolver RDC-19222S RDC-19222S Ch. 3 Ch. 2 RDC-19222S Ch.1 RDC-19222S Figure 17. Synchro/Resolver Input Configuration Data Device Corporation 27 SB-3631X Manual GLOSSARY APPENDIX F Model Number Identification For ordering information please refer to SB-36310CX Data Sheet. Data Device Corporation 28 SB-3631X Manual GLOSSARY Accuracy......................................A measurement deviation from a calibrated standard. AGND..........................................Analog Ground. BW (Bandwidth) .........................The frequency band in which a system can process information. Also known as the 3dB point. BIT (Built-in test) .......................Digital output that will indicate if a fault condition exists. Carrier Frequency .....................Reference or excitation frequency required by the synchro or resolver device and the converter. Coarse Angle...............................In a two-speed system, the reading from the synchro or resolver with a 1:1 ratio. Differential..................................Input signal that is with respect to another signal (S3-S1), but not to ground. Direct Input (sin/cos) ..................Input signal that is with respect to ground. Fine Angle...................................In a two-speed system, the reading from the resolver with a 1:N ratio, where N >1. GND ............................................Digital Ground. J-lead...........................................The lead of a device that is J- or hooked-shaped. Line-to-Line Voltage...................The measurement (in Vrms) between two signals. Measured Angle ..........................The analog synchro or resolver signals representing a position that is converted to a digital word or angle. Reference ....................................Excitation for synchro or resolver device and converter. Resolution ...................................Number of bits available for measurement or simulation. Resolver.....
View Full Document

{[ snackBarMessage ]}

Ask a homework question - tutors are online