HW1 - 2) For the speaker static calibration data in the...

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
EEL5225 Principles of MEMS Transducers HW1 Fall 2009 Semester Assigned: Wednesday, 8/26/09 Due: Wednesday, 9/2/09 1) From the specification sheet for the Kulite LEH-1AC-250 series (100 PSI model) miniature flatpack pressure transducer (see attached), determine the following a. Rated voltage input b. Nominal sensor power requirements c. Sensor sensitivity d. MDS and Dynamic Range, assuming a resolution of 0.01 mV for the voltage measurement system (Note the specification sheet lists “Infinitesimal” for resolution) e. Maximum pressure error due to nonlinearity, hysteresis, and repeatability (Note: “BFSL” stands for best fist straight line) f. Maximum pressure error under 10 g perpendicular acceleration (use 10 -6 as worst case) g. Maximum pressure error for a 50°F temperature shift. h. Maximum overpressure
Background image of page 1
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: 2) For the speaker static calibration data in the attached Excel spreadsheet, determine the following: a. Actuator authority (displacement per current) b. Full scale output c. Linearity (use all data points to determine analytical expression for LSF line including coefficient of determination, R 2 , and calculate maximum non-linearity) d. Hysteresis 3) For the microphone dynamic calibration data in the attached Excel spreadsheet, determine the following: a. Nominal flat-band sensitivity b. Bandwidth, cut-on, and cut-off frequencies for 3dB sensitivity limit c. Bandwidth, cut-on, and cut-off frequencies for 10dB sensitivity limit Reminder: Please remember the statement regarding academic honesty in the preparation of your homework solution as detailed in the course syllabus....
View Full Document

Ask a homework question - tutors are online