311 - cover on any empty sites-Add a fully submersible aquarium heater set to 78f through one of the net pots to speed the rooting process up-Plug

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
Index: GrowFAQ : How do I clone in a Rainforest 242? Added by: MisterIto Last edited by: 10k Viewed: 434 times Not Yet Rated Contributed by Highgrade: You'll need 42 net pots with neoprene inserts. -Cut the insert on one side to the hole in the middle to ease removing the rooted cuts without damaging the roots. -Fill with distilled water to recomended level and add 4 ml per gallon of B'cuzz Root Stimulator. -Take the cuttings using the normal proceedure, dip in a rooting gel (Clonex) and insert the cutting so the bottom protrudes approx. 1". Use a piece of cotton or makeup sponge to hold cut in place. -Be sure there's a net pot in every hole to prevent light getting to the solution. Use a netcup with
Background image of page 1
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: cover on any empty sites.-Add a fully submersible aquarium heater set to 78f through one of the net pots to speed the rooting process up.-Plug the unit in and run 24/7 until rooted, usually 6-10 days depending on strain. Top off the reservoir with distilled water as needed to maintain correct level. DO NOT allow the roots to grow into the motor/mister or you WILL burn the motor up. Last modified: 20:14 - Nov 25, 2000 Quicklink: http://overgrow.com/growfaq/311 GrowFAQ © 2000-2004 Overgrow faq:311 "How do I clone in a Rainforest 242?" Compiled by QMP3T...
View Full Document

This note was uploaded on 09/17/2009 for the course BIO 328 taught by Professor Roux during the Spring '08 term at University of Texas at Austin.

Ask a homework question - tutors are online