01-02ChapGere.0005

# 01-02ChapGere.0005 - 36 A-PDF Tension Compression and Shear...

This preview shows page 1. Sign up to view the full content.

Problem 1.6-15 A shock mount constructed as shown in the figure is used to support a delicate instrument. The mount consists of an outer steel tube with inside diameter b , a central steel bar of diameter d that supports the load P , and a hollow rubber cylinder (height h ) bonded to the tube and bar. (a) Obtain a formula for the shear stress t in the rubber at a radial distance r from the center of the shock mount. (b) Obtain a formula for the downward displacement d of the central bar due to the load P , assuming that G is the shear modulus of elasticity of the rubber and that the steel tube and bar are rigid. Problem 1.6-14 A bicycle chain consists of a series of small links, each 12 mm long between the centers of the pins (see figure). You might wish to examine a bicycle chain and observe its construction. Note particularly the pins, which we will assume to have a diameter of 2.5 mm. In order to solve this problem, you must now make two
This is the end of the preview. Sign up to access the rest of the document.

{[ snackBarMessage ]}

Ask a homework question - tutors are online