IE370Lecture11

IE370Lecture11 - 11.1 Introduction Chapter 11: Fundamentals...

Info iconThis preview shows pages 1–4. Sign up to view the full content.

View Full Document Right Arrow Icon
1 Chapter 11: Fundamentals of Casting 11.1 Introduction s Products go through a series of processes before they are produced b Design b Material selection b Process selection b Manufacture b Inspection and evaluation b Feedback s Materials processing is the science and technology that converts a material into a product of a desired shape in the desired quantitiy Shape-Producing Processes s Four basic categories b Casting processes b Material removal processes b Deformation processes b Consolidation processes s Decisions should be made after all alternatives and limitations are investigated Shape-Producing Processes Figure 11-1 The four materials processing families, with subgroups and typical processes.
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
2 11.2 Introduction to Casting s Casting process b Material is ______ b ______ to proper temperature b Treated to modify its _________ b Molten material is _____ into a mold b ______ s Casting can produce a large variety of parts Basic Requirements of Casting Processes s Six basic steps of casting b 1. Mold cavity is produced having the desired shape and size of the part s Takes shrinkage into account s Single-use or permanent mold b 2. _____ process s Provides molten material at the proper temperature b 3. _____ technique s Molten metal is poured into the mold at a proper rate to ensure that erosion and or defects are minimized. Six Basic Steps of Casting s 4. Solidification process b Controlled solidification allows the product to have desired properties b Mold should be designed so that shrinkage is controlled s 5. Mold removal b The casting is removed from the mold s Single-use molds are broken away from the casting s Permanent molds must be designed so that removal does not damage the part s 6. Cleaning, finishing, and inspection operations b Excess material along parting lines may have to be machined Capabilities and Advantages of Casting s Can create ______ part geometries s Can create both ______ and ______ shapes s Some casting processes are net shape; others are near net shape s Can produce very _____ parts s Some casting methods are suited to ____ production
Background image of page 2
3 Disadvantages of Casting s Different disadvantages for different casting processes: b Limitations on mechanical properties b Poor dimensional accuracy and surface finish for some processes; e.g., sand casting b Safety hazards to workers due to hot molten metals b Environmental problems 11.3 Casting Terminology s Pattern- approximate duplicate of the part to be cast s Molding material- material that is packed around the pattern to provide the mold cavity s Flask- rigid frame that holds the molding aggregate s Cope- top half of the pattern s Drag- bottom half of the pattern s Core- sand or metal shape that is inserted into the mold to create internal features Casting Terminology s Mold cavity- combination of the mold material and cores s Riser-additional void in the mold that provides additional metal to compensate for shrinkage
Background image of page 3

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Image of page 4
This is the end of the preview. Sign up to access the rest of the document.

Page1 / 10

IE370Lecture11 - 11.1 Introduction Chapter 11: Fundamentals...

This preview shows document pages 1 - 4. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online