Electrical_Safety_O_ - UFC 3-560-01 6 December 2006 Including change 1 7 December 2006 UNIFIED FACILITIES CRITERIA(UFC ELECTRICAL SAFETY

Info iconThis preview shows pages 1–4. Sign up to view the full content.

View Full Document Right Arrow Icon

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: UFC 3-560-01 6 December 2006 Including change 1, 7 December 2006 UNIFIED FACILITIES CRITERIA (UFC) ELECTRICAL SAFETY, O & M APPROVED FOR PUBLIC RELEASE: DISTRIBUTION UNLIMITED UFC 3-560-01 6 December 2006 Including change 1, 7 December 2006 UNIFIED FACILITIES CRITERIA (UFC) ELECTRICAL SAFETY, O & M Any copyrighted material included in this UFC is identified at its point of use. Use of the copyrighted material apart from this UFC must have the permission of the copyright holder. U.S. ARMY CORPS OF ENGINEERS NAVAL FACILITIES ENGINEERING COMMAND (Preparing Activity) AIR FORCE CIVIL ENGINEER SUPPORT AGENCY Record of Changes (changes are indicated by \ 1 \ ... / 1 /) Change No. Date Location 1 7 Dec 2006 10-14 (entire section) and 11-2 (entire section) This UFC supersedes the following documents: Air Force Manual 32-1185, Electrical Worker Safety. This manual was prepared in draft form, but was not issued. TM 5-682, Facilities Engineering, Electrical Facilities Safety. UFC 3-560-10N (previously MIL-HDBK-1025/10), Safety Of Electrical Transmission And Distribution Systems. Draft UFC 3-560-02, Electrical Safety . This document was made mandatory guidance by Air Force Engineering Technical Letter (ETL) 04-15, Electrical Safety Guidance UFC 3-560-01 6 December 2006 Including change 1, 7 December 2006 FOREWORD The Unified Facilities Criteria (UFC) system is prescribed by MIL-STD 3007 and provides planning, design, construction, sustainment, restoration, and modernization criteria, and applies to the Military Departments, the Defense Agencies, and the DoD Field Activities in accordance with USD(AT&L) Memorandum dated 29 May 2002. UFC will be used for all DoD projects and work for other customers where appropriate. All construction outside of the United States is also governed by Status of Forces Agreements (SOFA), Host Nation Funded Construction Agreements (HNFA), and in some instances, Bilateral Infrastructure Agreements (BIA.) Therefore, the acquisition team must ensure compliance with the more stringent of the UFC, the SOFA, the HNFA, and the BIA, as applicable. UFC are living documents and will be periodically reviewed, updated, and made available to users as part of the Services responsibility for providing technical criteria for military construction. Headquarters, U.S. Army Corps of Engineers (HQUSACE), Naval Facilities Engineering Command (NAVFAC), and Air Force Civil Engineer Support Agency (AFCESA) are responsible for administration of the UFC system. Defense agencies should contact the preparing service for document interpretation and improvements. Technical content of UFC is the responsibility of the cognizant DoD working group. Recommended changes with supporting rationale should be sent to the respective service proponent office by the following electronic form: Criteria Change Request (CCR) below....
View Full Document

This note was uploaded on 09/28/2009 for the course X RAY MECH EMP5209 taught by Professor Hui-leo-chen during the Fall '09 term at University of Ottawa.

Page1 / 225

Electrical_Safety_O_ - UFC 3-560-01 6 December 2006 Including change 1 7 December 2006 UNIFIED FACILITIES CRITERIA(UFC ELECTRICAL SAFETY

This preview shows document pages 1 - 4. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online