491 Project No. 6 BOTTOMS UP - PETE 491 Drilling...

Info iconThis preview shows pages 1–3. Sign up to view the full content.

View Full Document Right Arrow Icon

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: PETE 491 Drilling Engineering Project No. 6 Well-bore Volume and Bottoms Up Calculations UL Department of Petroleum Engineering Date Assigned: October 25, 2005 Date Submitted: November 1, 2005 Submitted to Dr. Hayatdavoudi ________________________ arbier J. PETE 491 Project No. 6 Performed: 10/25/05 Submitted: 11/3/05 Well-bore Volume and Bottoms Up Calculations The methods of describing the time that it takes to pump the fluids within a well bore can be approached in one of several methods. Calculating the time, strokes, and volume that it takes to cycle the mud through portions and the entire the well bore can be expressed in strokes to bit, bottoms up time, circulating volume, and several others. The factors of time, volume, flow rate, and strokes all represent a relationship with the physical dimensions of the well bore, including tubulars and pumping equipment. Starting with pumps, the output of mud pumps depends on the type (single or double acting duplex or triplex), manufacturer, and model with the corresponding horsepower.acting duplex or triplex), manufacturer, and model with the corresponding horsepower....
View Full Document

This note was uploaded on 10/27/2009 for the course PETROLEUM 491 taught by Professor Staff during the Spring '09 term at University of Louisiana at Lafayette.

Page1 / 5

491 Project No. 6 BOTTOMS UP - PETE 491 Drilling...

This preview shows document pages 1 - 3. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online