Chapt06

# P647 derive eq 659 showing all steps the constant 133

This preview shows page 1. Sign up to view the full content.

This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: C. Compute the sublayer thickness in inches and the pumping horsepower required at 75 percent efficiency if L 40 ft. P6.52 The pipe flow in Fig. P6.52 is driven by pressurized air in the tank. What gage pressure p1 is needed to provide a 20°C water flow rate Q 60 m3/h? *P6.53 In Fig. P6.52 suppose P1 700 kPa and the fluid specific gravity is 0.68. If the flow rate is 27 m3/h, estimate the viscosity of the fluid. What fluid in Table A.5 is the likely suspect? | e-Text Main Menu | P6.55 P6.56 Consider a horizontal 4-ft-diameter galvanized-iron pipe simulating the Alaskan pipeline. The oil flow is 70 million U.S. gallons per day, at a density of 910 kg/m3 and viscosity of 0.01 kg/(m s) (see Fig. A.1 for SAE 30 oil at 100°C). Each pump along the line raises the oil pressure to 8 MPa, which then drops, due to head loss, to 400-kPa at the entrance to the next pump. Estimate (a) the appropriate distance between pumping stations and (b) the power required if the pumps are 88 percent efficient...
View Full Document

{[ snackBarMessage ]}

Ask a homework question - tutors are online