Chapt06

H3 5m h2 h 1 1 m d 3 cm 1m h t p6148 d 5 cm p6145 q

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: h when the flow rate is 20 m3/h and (b) what is Q in m3/h when h 58 cm? Water d 5 cm h Mercury venturi with a 4-cm throat. The venturi is connected to a mercury manometer whose reading is h 40 cm. Estimate (a) the flow rate, in m3/h, and (b) the total pressure difference between points 50 cm upstream and 50 cm downstream of the venturi. P6.159 A modern venturi nozzle is tested in a laboratory flow with water at 20°C. The pipe diameter is 5.5 cm, and the venturi throat diameter is 3.5 cm. The flow rate is measured by a weigh tank and the pressure drop by a water-mercury manometer. The mass flow rate and manometer readings are as follows: m, kg/s ˙ 0.95 1.98 2.99 5.06 8.15 h, mm P6.154 3.7 15.9 36.2 102.4 264.4 | v v P6.155 It is desired to meter a flow of 20°C gasoline in a 12-cmUse these data to plot a calibration curve of venturi disdiameter pipe, using a modern venturi nozzle. In order for charge coefficient versus Reynolds number. Compare with international standards to be valid (Fig. 6.42), what is the...
View Full Document

{[ snackBarMessage ]}

Ask a homework question - tutors are online