Unformatted text preview: clock edge as shown in Fig. 1, where Q_next is the value of Q at the next cycle. What is the logic function to derive Q_next from T and Q? b. Define the state of this T-FF as the value of Q. Draw the state diagram of a T-FF. c. Fig. 2 shows a Set-Reset latch. Instead of a clock signal, the signals of set (S) and reset (R) control the value of Q. Note that S=R=1 is an illegal set of input, since Q and Q are not complementary under that condition. What is the logic function to derive Q_next from S, R, and Q? d. Define the state of an S-R latch as the value of Q, and the control signal as the legal value of SR. Draw the state diagram of a S-R latch....
View Full Document
This note was uploaded on 10/28/2009 for the course EEE 333 taught by Professor Ferry during the Fall '09 term at ASU.
- Fall '09