EET029_HomeWork_06 - kHz What is the modulation index If...

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
University Diploma Programs Electronic Equipment Maintenance EET-029: Introduction to Communications Home Work # 6 1. Explain fully the difference between frequency and phase modulation, beginning with the definition of frequency modulation. 2. Of the various advantages of FM over AM, identify and discuss those due to the intrinsic qualities of frequency modulation. 3. What is pre-emphasis? Why is it used? Sketch a typical pre-emphasis circuit and explain why de-emphasis must be used also. 4. What is the function of the balanced modulator in the Armstrong modulation system? 5. A 500-Hz modulating voltage fed into a PM generator produces a frequency deviation of 2.25
Background image of page 1
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: kHz. What is the modulation index? If the amplitude of the modulating voltage is kept constant, but its frequency is raised to 6 kHz, what is the new deviation? 6. When the modulating frequency in an FM system is 400 Hz and the modulating voltage is 2.4 V, the modulation index is 60. Calculate the maximum deviation. What is the modulation index when the modulating frequency is reduced to 250 Hz and the modulating voltage is simultaneously raised to 3.2 V? EET 029 - Introduction to Communications Copyright © Electrical Engineering Department, KFUPM....
View Full Document

This note was uploaded on 10/28/2009 for the course ELECTRICAL EET 029 taught by Professor Prof.khan during the Spring '09 term at King Fahd University of Petroleum & Minerals.

Ask a homework question - tutors are online