GoLogic - Figure As seen from Figure 2, we had used only...

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
Figure As you can see from Figure 1, we had run GoLogic2 Logic Simulator with a sampling frequency 50KHz, with 1M samples with normal timing. We left the threshold level, to the default, of 1.58 V. For Step 3, we chose to do a simple trigger form to detect a falling edge for midi at only one occurrence.
Background image of page 1
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: Figure As seen from Figure 2, we had used only Pod A and bits A0-A6 indicated the LED bits. We had input decimal value of 70 into the MIDI-OX program. This is consistent with what is shown in Figure 2 (the waveform is shown in terms of hex where 46 hex = 70 dec )....
View Full Document

This note was uploaded on 10/29/2009 for the course ECE 353 taught by Professor Burleson during the Spring '08 term at UMass (Amherst).

Ask a homework question - tutors are online